658656
133
Zoom out
Zoom in
Previous page
1/142
Next page
Exporting the log file
The log file can be exported from the files dialog.
When you select the Log database you are prompted to select a destination folder and
filename. Once accepted, the log file is written to the chosen location.
RSD sentence output
The output of RSD NMEA 0183 message can be enabled (default off) to provide cursor
position information to an external device. The cursor position information may be used by
devices such as thermal cameras with pan-tilt ability, and external radar displays.
Ú
Note: The sentence format (dictated by NMEA 0183) was not written to take in to
consideration dual radar systems, and therefore does not transmit identification
information to distinguish between sources. When two radar PPIs are shown on the
screen at the same time, only the first (left hand) radar provides RSD information. RSD is
shown on the radar PPI to indicate this feature is enabled.
Software upgrades
The latest software is available for download from our website, www.bandg.com.
Before initiating an update to the unit itself, be sure to back up any potentially valuable user
data. Refer to "Backing up your system data" on page 134.
The system or the Network analyzer and service assistant can advise software updates are
available.
Network analyzer and service assistant
The system has a built-in service assistant that creates a report of the devices installed on the
NMEA 2000 and Ethernet network such as the software versions, serial numbers, and
information from the settings file to assist in technical support enquiries.
To use the analyzer, open the About page of the System settings dialog and select Support.
Two options are displayed:
Create report
Analyzes your network and prompts you for information required for support and creates the
report with information automatically gathered from the network. You can add screenshots
and log files that will be attached to the report. There is a 20MB limit for the report
attachments. You can save the report to a memory card and email it to support or upload it
directly if you have an internet connection. If you call technical support first, you can enter an
incident number to assist with tracking.
Check system for updates
Analyzes your network and checks if updates are available for compatible devices.
Ú
Note: Connect your unit to the internet to check for the latest available software
versions. The software versions will be up to date as of the last time you updated your
unit or connected to the internet.
Update software
Ú
Note: Remove any mapping cards from your unit and install a memory card with
sufficient storage before downloading software updates or creating and saving reports
to the memory card.
Ú
Note: Do not turn off the MFD or device until the update is completed or you are
prompted to restart the unit or device being updated.
1. If your MFD is connected to the Internet, you can download the software update from the
Updates Dialog into a memory card. You can also download the software update from
www.bandg.com to a memory card inserted in a smart device or PC connected to the
internet.
2. Insert the card containing the software updates in your MFD.
Maintenance| Zeus3 Operator Manual
133
133


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BandG Zeus 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BandG Zeus 3 in the language / languages: English as an attachment in your email.

The manual is 11,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BandG Zeus 3

BandG Zeus 3 Installation Guide - English - 56 pages

BandG Zeus 3 Installation Guide - German - 58 pages

BandG Zeus 3 User Manual - German - 154 pages

BandG Zeus 3 Installation Guide - Dutch - 56 pages

BandG Zeus 3 User Manual - Dutch - 150 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info