Manual BandG ZC1 (page 6 of 24) (English, German, French, Italian, Spanish)

658716

Zoom out

Zoom in

1/24

6 |

Conguring the ZC1

The ZC1 can control up to 4 compatible MFDs (Multi Function

Displays). Refer to your MFD’s website for more information.

From the factory the ZC1 is not assigned to control any MFD. It will

not be responsive until it has been assigned to control an MFD on

the network.

1. Turn ON all MFDs that are to be conﬁgured for ZC1 control

2. Press and hold the DISPLAY key on ZC1 for 5 seconds to enter ZC1

conﬁguration mode

- All LEDS on the ZC1 turn red to indicate that the ZC1 is in

conﬁguration mode

3. Press the DISPLAY key until the MFD to be assigned shows the

active assignment dialog

¼ Note: The MFDs are identiﬁed with letters for assignment purpose.

These letters are random and not in any particular order.

4. Press the 1, 2, 3 or 4 key on the ZC1 to assign active MFD to LED

position 1, 2, 3 or 4 respectively

- It is logical to assign LED(s) 1 through 4 (left to right) to units

moving from left to right.

5. Press the DISPLAY key until the next MFD to be assigned shows

the active assignment dialog

- Already assigned MFDs will now show the passive assignment

dialog

Active MFD Passive MFD

6. Repeat step 3 and 4 until all MFDs are assigned to a LED

7. Press the X key to save your settings and return to normal operation.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of BandG ZC1 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

BandG ZC1 Manual

Product: