658717
39
Zoom out
Zoom in
Previous page
1/102
Next page
37
Dening Custom Fastnet Menus
usermenu.d
This le enables you to either add a function to an existing menu or add a new menu with associated functions.
In the le example shown below we have added two new menus called DECKMAN and SAILS with functions
and we have also added two functions to the existing PARAMTR menu. Note that the Deckman functions are all
named RemoteX as the Deckman software will send the relevant function text with the function – here we are
just dening a placeholder in the menu.
DECKMAN 01b1 03
REMOTE1 01b1 01 F0
REMOTE2 01b1 02 F1
REMOTE3 01b1 03 F2
REMOTE4 01b1 04 F3
SAILS 01b2 04
MAIN_POS 01b2 01 A1
JIB_CAR_P 01b2 02 A2
JIB_CAR_S 01b2 03 A3
CWA______@ 0112 04 A8
CWS______@ 0112 05 A9
The le format here is best dealt with by looking at part of the example above:
SAILS 01b2 04
MAIN_POS 01b2 01 A1
JIB_CAR_P 01b2 02 A2
JIB_CAR_S 01b2 03 A3
The rst line creates a new menu called SAILS, format as follows:
Menu name As is appears on the display - “SAILS” in the example above
Menu ID number New menus use ID numbers 01b1, 01b2, 01b3 etc.
Menu position Identies where the menu appears in the Display - here it is 4th in the chain
The following lines add functions to the menu – here we are adding three functions to the menu, the Mainsheet
Traveller position and Jib Car positions (port and starboard). The format is as follows:
Function Name As is appears on the display - e.g. “MAIN_POS” in the example above*
Menu group ID The ID number of the menu group the function is to appear in
Function order The position in the menu the function should appear (simple 01, 02, 03 etc.)
Fastnet Function No. The hexadecimal value of the fastnet function number
* If you wish to display units use “_” for a space, “@” for a degrees sign.
Function Name As is appears on the display - e.g. “MAIN_POS” in the example above*
Menu group ID The ID number of the menu group the function is to appear in
Function order The position in the menu the function should appear (simple 01, 02, 03 etc.)
Fastnet Function No. The hexadecimal value of the fastnet function number
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BandG WTP3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BandG WTP3 in the language / languages: English as an attachment in your email.

The manual is 7,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info