658719
44
Zoom out
Zoom in
Previous page
1/55
Next page
H3000 System Installation Guide
44
IS-2530-01
EXPANSION PROCESSOR
The Expansion Unit can be connected to the H3000 system via the Fastnet to
provide 12 extra analogue inputs. Once the Expansion processor is connected a
new menu will automatically appear on all of the GFDs on the system. Up to 12
linear functions may be displayed numbered LINEAR 5 to LINEAR 16. Initially
only LINEAR 5 is shown.
LINEAR 5 has four calibration values, other linear functions have three calibration
values found by selecting CALIBRATE on the appropriate linear function. Any one
of the Linear inputs 1 – 4 on the Main Processor may be set to the same function as
any one of the Linear 5 to 18 inputs.
Calibration value 4 is only available on Linear 5 and this displays a value between
05 and 16. This setting determines the number of linear inputs that are available.
For example, changing this value to 10 would display a maximum of 10 linear
inputs. The default value is 05.
Note: Extra functions selected and then removed remain in the display menu but
with no data shown. These will not disappear until the system is switched off and
then back on again. Linear functions will always be shown if selected by CAL VAL
4 on Linear 5. They will show no data if the CAL VAL 1 is set to 1 or 2.
Expansion Processor Wiring
Terminal Function Wire Colour
14 Network Data -ve Green
15 Network Data +ve White
16 Network Screen Screen
17 Battery Supply Ground Black
18 Battery Supply 12V Red
19 Battery Volts Sense Link to 18
21 Ground Blue
22 Sensor Supply +6.5V Red
23 Linear 5 Input Green
24 Linear 6 Input Green
25 Linear 7 Input Green
26 Linear 8 Input Green
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BandG H3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BandG H3000 in the language / languages: English as an attachment in your email.

The manual is 6,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BandG H3000

BandG H3000 User Manual - English - 120 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info