764826
10
Zoom out
Zoom in
Previous page
1/25
Next page
Filtration Einstellen
Hauptfiltration
Filterzyklen sind auf eine Startzeit und eine Dauer eingestellt.
Startzeit wird durch ein "A" oder "P" in der rechten unteren
Ecke des Displays angezeigt
.
Dauer hat keine “A” oder “P” Anzeige. Jede Einstellung kann in 15 Minuten Schritten
eingestellt werden
. Die Steuerung berechnet die Endzeit und zeigt sie automatisch.
Zeigt Blinken oder Änderndes Segments an
Zeigt wechselnde oder schrittweise Nachrichten an – alle Sekunde
Eine Temperatur Taste, benutzt für “Action”
Licht o. spez “Choose” Taste, abhängig v.d. Konfig.einst. im Bedienelement
Wartezeit bis zur letzten Änderung des Menüs
.
Wartezeit (je nach Menüpunkt), die ursprüngli. Einstellung wird wiederhergestellt
Und jede Änderung dieses Menüpunkts ignoriert
Nach
einigen Sekunden
kommt die Original Einst.
*****
Warten bis zu-
rückspringt
*****
Hauptbildschirm
Einstellen
*****
Nach einigen Sekunden wird die
neue Start- und Laufzeit des
Filter 1 auf die vorherigen Einstellungen
des Filter 1 zurückgesetzt.
Hauptbildschirm
Nach einigen
Sekunden kommt
die Original Einstellung
*****
Warten bis zu-
rückspringt
*****
Hauptbildschirm
Einstellen
*****
Nach einigen Sekunden wird die
neue Start- und Laufzeit des
Filter 2 auf die vorherigen Einstellungen
des Filter 2 zurückgesezt
t
Filterzyklus 2 ist standardmäßig deaktiviert.
Es ist möglich Filterzyklus 1 und Filterzyklus 2 zu überlappen, was die Gesamtfiltration um die
Überlappungszeit kürzt.
Säuberungszyklen
Um hygienische Bedingungen zu erhalten, werden zusätzliche Pumpen und / oder
Gebläse gesäubert, indem sie zu Beginn jedes Filterzyklus
kurz laufen
.
Wenn Filterzyklus 1 für 24 Stunden eingestellt ist, beginnt Filterzyklus 2 eine
Säuberung, falls er so eingestellt ist.
Hergestellt unter einem oder mehrerer dieser Patente
.
U.S
.
Patente: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Kanad.Patent: 2342614, Austral.Patent: 2373248 weitere sowohl ausl. als auch inländ. beantragte u. angemeldete Patente
.
Alle Materialien sind urheberrechtlich geschützt v. Balboa Water Group.
05-08-12
Schlüssel
Hauptbildschirm
Zum nächstem Item
im Hauptme
Filterzyklus 2
Während die eingestellte Temperatur
noch blinkt, Light drücken
wiederholt bis FLTR 1
in der Anzeige erscheint.
Startzeit blinkt
zeigt RUN HRS
zeigt F1 ENDS xx:xx
Einstellen
Einstellen
Startzeit blinkt
zeigt RUN HRS
zeigt F1 ENDS xx:xx
Einstellen
- Optionale Filtration
*****
Minuten einstellen
Teil einer Stunde wählen
Startzeit einstellen
Dauer v. Filter 1 in h einst.
Nach einigen Sekunden
kommt die Originaleinst.
*****
Einstellen
Startzeit h einstellen
Län
g
e v. Filter 1 in h einst.
15-Minuten-Schritte einst.
15-Minuten-Schritte einst.
Minuten einstellen
Teil einer Stunde wählen
15-Minuten-Schritte einst.
15-Minuten-Schritte einst.
10
40940_I
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Balboa TP400 Display at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Balboa TP400 Display in the language / languages: German as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Balboa TP400 Display

Balboa TP400 Display User Manual - English - 25 pages

Balboa TP400 Display User Manual - Dutch - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info