784763
16
Zoom out
Zoom in
Previous page
1/28
Next page
Manufactured under one or more of these patents.
U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2, Canadian Patent: 2342614,
Australian patent: 2373248 other patents both foreign and domesc applied for and pending. All material copyright of Balboa Water Group.
42281_A | Compable with SpaTouch 1 & 2 16 03.17
Adjusting Filtration
Continued... Additional Settings
Auxiliary Panel(s)
Circulation Pump Modes
Some spas may be manufactured with Circ Pump settings that
allow programming filtration cycle duration. Some circ Modes
are pre-programmed to operate 24 hours a day and are not
programmable. Refer to the spa manufacturers documenta-
tion for any Circ Mode details.
Purge Cycles
In order to maintain sanitary conditions, as well as protect
against freezing, secondary water devices will purge water
from their respective plumbing by running briefly at the be-
ginning of each filter cycle. (Some systems will run a certain
number of purge cycles per day, independent of the number
of filter cycles per day. In this case, the purge cycles may not
coincide with the start of the filter cycle).
If the Filter Cycle 1 duration is set for 24 hours, enabling
Filter Cycle 2 will initiate a purge when Filter Cycle 2 is
programmed to begin.
The Meaning of Filter Cycles
1. The heating pump always runs during the filter cycle*
2. In Rest Mode, heating only occurs during the filter cycle
3. Purges happen at the start of each filter cycle
* For example, if your spa is set up for 24/hour circulation ex-
cept for shutting off when the water temperature is 3˚F/1.3˚C
above the set temperature, that shutoff does not occur dur-
ing filter cycles.
Light Cycle Option
If Light Cycle does not appear on the Settings Screen, the
Light Timer feature is not enabled by the manufacturer. The
Light Cycle Icon on the Settings Screen takes you to a screen
where you control the Light Cycle. When available, the Light
Timer is (“Disabled“) by default. Press “Disabled“ to change it
to “Enabled“ (ON). The settings can be edited the same way
that Filter Cycles are edited.
Specific Buttons for Specific Devices
If the spa has an Auxiliary Panel(s) installed, pressing buons on
that panel will acvate the device indicated for that buon.
These dedicated buons will operate just like the Spa Screen
buons (see page 6) and the equipment will behave in the same
manner with each buon press.
9:00
9:15
Disabled
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Balboa SpaTouch2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Balboa SpaTouch2 in the language / languages: English as an attachment in your email.

The manual is 2.12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info