306654
5
Zoom out
Zoom in
Previous page
1/68
Next page
5
en
Removing the transport securing devices
Remove all the transport securing devices from the back of the
machine before starting the appliance for the first time.
Use the spanner supplied only if a suitable ring spanner is not
available.
Caution. Risk of injury through slipping.
m Loosen and remove the 4 fastening bolts «A», the tie bar and
the seal.
m Next remove the four spacers «B» which will have fallen to the
floor. Gently tilt the appliance forward.
m Fit the protective covers «C» which are in the bag
accompanying the appliance documentation.
! Keep the transport securing devices in case you need to move
the appliance in future.
The appliance should only be moved with the transport securing
devices in place. To fit them, remove the back panel «D» from the
appliance and carry out the operations given above in reverse
order.
Installing the appliance
! When installing the appliance and connecting the water and
electricity supplies, the following should all be to hand: safety
instructions, warnings, general advice and information, and
standards or requirements from water and electricity suppliers.
! Take care when lifting the appliance. Risk of injury.
! Do not lift the appliance by the controls or protruding
components.
! If you are in any doubt, commission a qualified person to
connect the appliance to the water and electricity supplies.
All appliances are rigorously tested at the factory under normal
working conditions. The appliance or the outlet hose may still be
damp or contain residual water as a result of these tests.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Balay 3ts 834 a at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Balay 3ts 834 a in the language / languages: English as an attachment in your email.

The manual is 2,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info