775403
23
Zoom out
Zoom in
Previous page
1/42
Next page
22 HANDLEIDING VOOR DE KLANT – M420 AANDRIJFSYSTEEM
“TRIP Reset” --- stelt de reset functie in
voor afstand van een enkele rit
Druk kort (< 0,5 sec.) op of om "TRIP
Reset" te selecteren en druk dan kort (< 0,5
sec.) op . Druk vervolgens kort (< 0,5
sec.) op of om te schakelen tussen
"NO" en "YES". TRIP Reset omvat maximale
snelheid (MAXS), gemiddelde snelheid
(AVG), afstand van een enkele rit (TRIP). Na
bevestiging drukt u kort (< 0,5 sec.) op
om de instelling op te slaan en terug te
keren naar "TRIP Reset". Druk tweemaal kort
op (met de tussenliggende tijd korter
dan 0,5 sec.) om terug te keren naar de
hoofd interface, of kies “BACK” “EXIT”
om terug te keren naar de hoofd interface.
De gegevens worden niet automatisch
gereset wanneer het beeldscherm wordt uit-
geschakeld of de energie van de fiets wordt
uitgeschakeld.
AL Sensitivity” --- instelling van licht
gevoeligheid
Druk kort (< 0,5 sec.) op of om “AL
Sensitivity” te selecteren en druk dan kort
(< 0,5 sec.) op . Druk vervolgens kort
(< 0,5 sec.) op of om het niveau
van lichtgevoeligheid te kiezen tussen
“0”/“1”/“2”/“3”/“4”/“5”/“OFF”. “OFF”
betekent sluit de functie af. Niveau 1 is de
zwakste lichtgevoeligheid en niveau 5 is de
sterkste lichtgevoeligheid. Kies het gewenste
niveau en druk weer kort (< 0,5 sec.) op
om de instelling op te slaan en terug te ker-
en naar "AL Sensitivity". Druk tweemaal kort
op (met de tussenliggende tijd korter dan
0,5 sec.) om terug te keren naar de hoofd
interface, of kies “BACK” “EXIT” om terug
te keren naar de hoofd interface.
“Password”--- instelling van een wacht-
woord voor toegang
Druk kort (< 0,5 sec.) op of om
"Password" te selecteren en druk dan kort (<
0,5 sec.). Druk vervolgens kort (< 0,5 sec.)
op . This momen, briefly press (<0.5S)
of om "Start PassWord" te selecteren en
druk vervolgens weer kort (< 0,5 sec.) op
. Druk kort (< 0,5 sec.) op of 2 om te
kiezen tussen "AAN"/"UIT", hieronder staat
de specifieke wijze van omschakelen.
Wachtwoord om te beginnen:
Ga in de "Start PassWord" interface en
selecteer "ON". Druk kort (< 0,5 sec.) op
, en vervolgens wordt op de interface
getoond waar u het wachtwoord in moet
geven. Vervolgens drukt u kort (< 0,5 sec.)
op of om de nummers "0-9" te kiezen
en druk daarna kort (< 0,5 sec.) op om
het ingevoerde nummer te bevestigen. Na
de invoer wordt het ingevoerde wachtwoord
opnieuw getoond in de interface. Herhaal
de bovenstaande stap om het wachtwoord
opnieuw in te voeren. Als het wachtwoord
hetzelfde is als de vorige keer, zal het
systeem aangeven dat het instellen van het
wachtwoord geslaagd is, zo niet dan moet
u de eerste stap herhalen om het nieuwe
wachtwoord in te voeren en vervolgens te
bevestigen.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bafang M420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bafang M420 in the language / languages: Dutch as an attachment in your email.

The manual is 3.3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info