715681
9
Zoom out
Zoom in
Previous page
1/40
Next page
9
IMPORTANT WARNINGS
Only use the current adapters provided. Using other current
adapters could damage the appliance.
When the appliance is not in use for an extended period of
time, take all of the batteries or rechargeable batteries out of
the receiver to prevent them from leaking.
Unplug the current adapter from the wall plug when the unit
is not in use.
The optimal operating temperature range of the appliance is
between -9°C and +50°C.
Do not leave the appliance exposed to direct sunlight for
an extended period of time, or near a source of heat, or in a
humid or dusty environment.
When the casing of the appliance is dirty, use detergent and
a soft cloth to clean it. Never use an abrasive cleaner or
chemical solvent.
Never open the casing as it does not contain any parts that
require maintenance.
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Electrical and electronic appliances must be disposed of
separately.
Do not dispose of electric and electronic equipment as
household waste, but dispose of it in accordance with selective
sorting.
The use of a baby monitor must in no way replace parental
supervision.
Always make sure that these two units stand upright during
use.
Never open the casing of the equipment except for the battery
compartments.
Keep the adapter or units out of the reach of children.
In compliance with the R&TTE directive (1999/05/EC) of the
European Parliament and Council of March 9th, 1999 (See
attached declaration of conformity).
Protect the environment: do not dispose of electrical
appliances as household waste.
Take any electrical appliance you no longer use to
a specific waste-collection centre. This will help
prevent the potential effects of any incorrect disposal on the
environment and health. This will contribute to recycling and
other forms of reusing electrical and electronic appliances.
Information on sites where appliances can be disposed of is
available from your local authorities. In many European Union
countries, the disposal of electrical and electronic appliances
in household waste has been forbidden since August 13
th
, 2005.
USING THE DIGITAL MENU
Press button
(10) to visualise the main menu options.
Press buttons (18) and (19) to scroll through the
options.
Select an option by pressing button (17).
Brightness Option: allows you to regulate screen
brightness. Use button (18) or (19) to select the
desired level. Once the level has been selected, press
(10) to return to the main menu, press button (10) again
to exit the menu.
“Auto-mute” option: when you are in continuous
transmission mode, there is no sound and it only turns on
again when baby cries. Press button (17) to activate or
deactivate this function. Only when the «Auto-mute» option
is blocked will the function be deactivated. Once the function
has been selected, press (10) to exit the menu.
“VOX” Option:
Voice functioning: the transmitter only displays the image
and sound when your baby cries.
Go to
(10) move through the menu using button
(18) to go to the right and select the mode by pressing
button (17). When is activated, the menu option is
highlighted and the «VOX» mode indicator light (13) turns
green. Exit the menu by pressing button (10) again.
Continuous mode: the transmitter permanently displays the
image and sound of baby.
Press button (10) move through the menu using button
(18) to go to the right and select the mode by pressing
button (17). When “VOX” is not highlighted, you are in
continuous mode. Exit the menu by pressing button (10)
again.
“Sound sensitivity” option: it allows you to choose
from 3 levels of microphone sensitivity on the transmitter,
which will determine if the signal must be broadcast to the
receiver in “VOX” mode or “Auto-mute” mode.
Use buttons (18) or (19) to select the desired level.
Once the level has been selected, press (10) to return to
the main menu, press button (10) again to exit the menu.
“Vibrate mode” option: it allows to turn on the vibrate
function on the transmitter. When baby cries, the transmitter
starts to vibrate. Select the vibrate function using button
(17) . Press button (10) to exit the menu.
Infrared Night-mode transmitter functioning:
Thanks to the light sensor (2), the camera automatically
switches to infrared mode when light intensity is too low
in the room where the transmitter is located. The camera
allows you to see the screen of the receiver in black and
white and everything that is within a 2 metre radius of the
camera.
Indicators:
It indicates the level of signal between the transmitter
and the receiver. If the number of bars is low, signal
between the 2 units is not at its best. Move one of the units
to improve signal.
It indicates the level of battery power in the receiver.
If the number of bars is low, the batteries are flat and the
receiver must be connected to the power to recharge them.
The bars move when the batteries are charging.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Badabulle B014405 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Badabulle B014405 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 4,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info