496277

Babymoov Ultimate Care Manual

16
Zoom out
Zoom in
Previous page
1/66
Next page
IN CASE OF PROBLEMS
Problem Possible cause Solution
• No audio or videosignal is
transmitted
• The microphone sensitivity is set too
low.
• The batteries have run out or the AC
adapters are not properly connected.
• Increase the microphone sensitivity
using the button 2.
• Charge up the battery of the receiver /
install new batteries in the transmitter
or check the connection.
• Transmits without interruption • The microphone sensitivity is set too
high.
• Decrease the microphone sensitivity
using the button 2.
• No image on screen only audio is
heard
• The video is out of range.
• Screen On/Off switch (23) is off.
• Move parent unit closer to baby unit.
• Switch button (23) on.
• Out-of-range alarm sometimes on
with no reason
• Interference from other devices
operating in same channel.
• Switch to another audio channel on both
transmitter and receiver.
• Image on screen not smooth or
become still
• The video is out of range. • Move parent unit closer to baby unit.
• Image becomes black and white • Light intensity too low in baby’s room ;
baby unit operates under night vision
mode using infrared LED as source of
illumination.
• Increase light intensity of baby’s room.
• Always showing low battery • Batteries have run down.
• No battery in the receiver.
• The receiver’s battery is damaged.
•
Charge up the battery of the receiver /
install new batteries in the transmitter or
check the connection.
• Replace the battery in
the battery compartment.
• Contact the customer service.
• The transmitter batteries life is too
short
• The camera is permanently on. • Return to VOX operation.
• Many static noise and Interference • Baby unit is located near other
electrical appliances.
• Remove electrical appliances or
re-locate baby unit far away from
source of interference or change to
another channel.
• Too short communication range • Many partitions between baby and
parent unit.
• Baby unit batteries has run down.
• Re-locate baby or parent unit.
• Replace with new batteries or use
switching power supply.
BABY MONITOR ULTIMATE CARE • Instruction Manual
18
• Out-of-range alarm always on • Audio channel setting is different in
baby and parent unit.
• Baby unit batteries have run down.
• Distance between baby and parent unit
exceeds operating range.
• Set the same audio channel in both
baby and parent unit.
• Replace with new batteries or use
switching power supply.
• Move parent unit closer to baby unit.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Babymoov Ultimate Care at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Babymoov Ultimate Care in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info