715616

Babymoov Slick A010403 Manual

7
Zoom out
Zoom in
Previous page
1/28
Next page
7
This product requires very little maintenance.
CLEANING AND MAINTENANCE MUST BE DONE SOLELY BY AN ADULT.
• The high chair has a resistant fabric cover which is completely removable and washable.
• To remove or replace the seat (A) cover, follow the instructions in the ‘USE’ paragraph.
• Caring for the seat (A) and reducer (G) fabric: machine washable at 30 °C. Ensure you remove the foam underneath the
reducer (G) before machine washing.
For added comfort, we recommend ironing the seat (A) fabric:
- fry iron below 90 °C: ensure you add a cloth between the seat fabric and the iron.
- Steam iron over 100 °C: ensure you add a cloth between the seat fabric and the iron.
• Clean plastic parts regularly with a damp cloth. Do not use solvents or other similar products.
• Protect the product from weather, water, rain or snow.
• Excessive exposure to the sun or heat may discover parts.
EInaj
MAINTENANCE AND CLEANING INSTRUCTIONS
5. Removable reducer (G)
The reducer can be removed from the seat (A) for machine washing, or can be removed when the product is being used as a
high chair.
There is foam in a pouch underneath the insert. Ensure you remove this foam before putting the insert in the washing machine
to avoid damaging it.
To put the reducer back in place, reposition the foam in the pouch located at the back of the reducer, then insert the harness
and the crotch post into the slots provided.
6. Tilting the seat (L)
To tilt the seat, pull the handle (L) located on the back of the seat (A) and tip the seat (A) backwards into the desired position.
The seat backrest can be tilted into 3 positions, including one in bouncer mode for newborns weighing up to 9 kg using the insert.
7. Height adjustment (F)
Simultaneously press the 2 buttons (F) located on each side of the seat to raise or lower the seat (A). There are 5 height
adjustment positions.
8. Fastening and unfastening the harness (K)
To unfasten the harness (K), press the central button (K5).
To fasten the harness (K), insert the buckle (K1) located at the hips into the buckle (K2) on the shoulder strap. Repeat on the other
side with buckles (K3) and (K4). Then insert the two shaped buckles on each side of the central buckle (K5).
9. Opening/closing the tray (E)
To open or close the tray, press the buttons (J) located on each side of the seat (A) then pull or push the tray. The tray (E) can
be opened or closed from either side.
To completely remove the tray, press the buttons (J) and pull the tray towards you on one side and then the other.
The tray is also dishwasher-safe.
10. Removing the crotch post (M)
To remove the crotch post, unscrew the two screws located underneath the seat (A) cover at the crotch post (M) using a cross-tip
screwdriver. Retain the screws so you can put the crotch post (M) back in place for a smaller child.
11. Adjusting the footrest (H)
Adjust the height of the footrest (H) depending on the size of the child. Simultaneously press the two buttons (I) located on each
side of the footrest, then raise or lower the footrest (H) to the desired height.
12. To remove the cover, unfasten the press-studs located on both sides of the seat (A) as well as those located underneath the seat
(A). Then pull the cover upwards carefully to avoid damaging it. To make it easier to remove the cover, pull the seat tilt button
(L) upwards. To put the cover back on, carefully position it on the seat so as to not to damage it. To make it easier to put the
cover on, pull the seat tilt button (L) upwards then slip on the cover. Finally, attach the cover using the press-studs located on
each side and underneath the seat (A) of the high chair.
13. Dismantling the product for storage
To dismantle the product, the seat (A) must first be separated from the frame (B). To do so, place the high chair in its highest
position, then use a thin screwdriver to press in the 2 slots located on each side of the frame (B) and pull the seat (A) upwards.
To completely remove the seat, use the height adjustment buttons
(F).
Finally, completely remove the tray (E) as well as the legs (C & D) by pushing the button located at the top of each leg.
USE
SLICK
• Instructions for use
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Babymoov Slick A010403 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Babymoov Slick A010403 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 0,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info