715625

Babymoov Babydoppler Connect - A062201 Manual

14
Zoom out
Zoom in
Previous page
1/44
Next page
14
or clean with a soft dry cloth.
Your Babydoppler Connect device is fragile and should be handled with care. The gel must be
removed after each use of the doppler. These precautions will prolong the life of your doppler.
The user must also make sure before handling it that the doppler does not present any obvious
damage which might affect its safety and the correct functioning of the device.
The typical operation time of the batteries is up to 20 days. This equipment expected service
life is 10 years. Before operating this equipment make sure to wait 10 minutes in order to let it
warm or cool and reach ambient temperature.
It is recommended to check the proper functioning of the device at monthly intervals. If there is
any proven damage, it is advisable to replace the doppler before use. Carry out regular safety
tests to make sure that the device is insulated against leakage current, including measuring
the leakage current. The recommended frequency is once every two years or according to the
directives of the country in which the device is used.
The device and accessories are to be disposed of according to local regulations after their
service lives. They can be returned to the dealer or the manufacturer for recycling or proper
disposal.
The Babydoppler Connect and its mobile application do not provide precise data on the foetal
cardiac rhythm but simply a sound recording. If the foetal cardiac rhythm is not credible, there
are other methods such as the stethoscope to check it. Only the doctor is authorised to
carry out this kind of measure.
11. IN CASE OF PROBLEMS
Generally speaking, in case of any problems switch off your doppler, remove the batteries and
unplug the cables supplied. Plug the cables back into your smartphone or tablet and your
doppler, re-install the batteries and switch your doppler back on.
If the following problems arise again when using your doppler, try to solve them by using the
proposed solutions.
12. WARRANTY
Babydoppler Connect application was developed for the new generation of smartphone and
tablets and new versions of iOS/Android operating systems. BABYMOOV and LATL TECHNO-
Problems Possible reasons Solutions
The sound is
weak
The volume is too low.
The batterie is worn out.
You did not apply contact gel.
Adjust the sound volume of the
doppler.
Change the batteries.
Apply gel to the probe.
There is noise The volume is too high.
The power is low.
Disturbance from an external signal.
Adjust the sound volume of the
doppler.
Change the batteries.
Make sure your smartphone or
tablet is in Airplane Mode.
There is low
sensitivity
The probe is wrongly positioned.
You did not apply contact gel.
Adjust the position of the probe.
Apply gel to the probe.
You cannot
hear or record
the baby’s
heartbeat
The position of the probe is incorrect.
You did not apply contact gel.
The cables are not connected correctly.
Adjust the position of the probe.
Apply gel to the probe.
Make sure that the cables are
correctly connected.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Babymoov Babydoppler Connect - A062201 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Babymoov Babydoppler Connect - A062201 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info