665402
11
Zoom out
Zoom in
Previous page
1/72
Next page
18 19
LOCKING
The appliance has a Locking function that prevents the appliance from being switched on and
the buttons activated accidentally, for example during travel.
1
To activate the Locking function
Press and hold down the Parking button
until the Lock symbol ashes.
The Locking function is activated.
Note: This may take approximately ten seconds.
The Parking symbol lights up.
The 3 combs will rise progressively.
The appliance head is unclipped and descends, bringing the combs with it.
The Lock symbol ashes and the LED display screen turns o .
2
To deactivate the Locking function
Press and hold down the Parking
button until the display screen shows a 3 to 1 countdown;
the Lock symbol
ashes and the cutting length and remaining use time are displayed.
The Locking function has now been deactivated. You can now use the appliance
again.
Note
• Locking is automatically deactivated when the appliance is placed in its stand.
• Locking can also be deactivated using the
button.
CHANGING THE CUTTING HEADS
In order to maintain the performance of your product, we recommend that you change the
cutting heads every year.
A kit of three cutting heads and the necessary tools is available for sale in shops or from the
BaByliss Customer Service department under BaByliss product code SH050E.
TROUBLESHOOTING
Problem Possible cause Solution
The LED screen display shows
“HI” or “LO”.
The adapter used is not suitable
to charge the appliance.
Check that you are using the adapter supplied with the
appliance to charge the appliance.
The LED screen display shows
“ER”.
A malfunction has occurred
while charging the appliance.
Remove the appliance from its stand for an hour.
If the problem continues, contact the BaByliss after-sales
service.
The LED display screen shows
the fl ashing Cleaning symbol
when you press the
button.
The appliance has not been
cleaned after 15 minutes of
continuous use.
Press the Cleaning button
and clean the appliance as
described in the chapter on cleaning.
The appliance head does not
unclip after having pressed the
Cleaning button
or Parking
button
.
The automatic head-raising
mechanism of the appliance
activated by the Cleaning
button
or Parking button
is blocked by hair and
impurities.
You can lift the head manually using 2 fi ngers to press
simultaneously on the notches on the front and back of
the appliance.
Then press the Cleaning button and place the
appliance head under running water as described in the
chapter on cleaning, or the Parking button
to store your
appliance correctly.
The appliance head lifts up
during use and the motor
stops.
The Cleaning
or Parking
button has been pressed
accidentally during use.
Press the Cleaning
or Parking button so that the
appliance returns to the desired position.
Note: if the appliance head has become unclipped, clip it
in again.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BaByliss SH510E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BaByliss SH510E in the language / languages: All languages as an attachment in your email.

The manual is 4,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info