665401
10
Zoom out
Zoom in
Previous page
1/72
Next page
16 17
lets you use the appliance for approximately 3 minutes.
When the screen displays that there are 5 minutes of use remaining (“05”), the
Timer symbol
changes from orange to red and the display of the remaining
use time display  ashes meaning that the appliance needs to be charged (by
placing the appliance in its charging stand).
USE
To start the appliance,
1
Ensure that the appliance head is perfectly clipped into place before use.
2
Press the button once.
The cutting length and approximate remaining use time are displayed.
3
Select the desired cutting length using the + and - buttons.
4
Press the button a second time.
The motor is on. You can now start using the appliance.
5
To switch the appliance o , hold down the button for approximately 2 seconds. The cutting
length is set for the next use. Press the
button twice to start the appliance again.
Note:
• The LED display screen switches o automatically after 60 seconds of disuse.
It is possible to switch the appliance to standby mode by pressing the
button
once.
Tips:
- For your comfort, the appliance can be used in diff erent directions. You can make circular
movements or go backwards and forwards with the appliance over the face and neck. You
will probably need time to get used to the appliance. But quickly, using the appliance will
be comfortable and intuitive.
- If you want to go from a mid-length beard (±15 mm long) to a 3-day beard (approximately
1 mm long), it is advisable to cut it in several steps. For example: to go from a beard of
10 mm in length to one that is 1 mm long, fi rst cut to 6 mm. Then, once this fi rst stage is
complete, cut to 1mm.
- For beards that are longer than 20 mm, it is recommended that you pre-cut your beard to
about 15 mm in length before using the appliance.
- To trim your moustache or your sideburns with precision, ensure that you stretch the skin
of the area to be trimmed and only use one rotating blade.
- To shape clean and precise contours, we recommend the use of a BaByliss beard trimmer
and/or a fi nishing trimmer and/or a shaver.
CLEANING
To clean the appliance thoroughly
1
Check the appliance is on and press the Cleaning button . The appliance goes into its
cleaning cycle:
The Cleaning symbol lights up on the LED display screen
The appliance head makes 3 back and forth movements to enable any hairs to be
eliminated more easily.
2
Gently shake the appliance above the sink to remove as much hair and residue as possible.
3
You can turn on the appliance using the button to increase cleaning e ciency under
running water.
4
Place the appliance head under running water, alternating the head down and head up,
while the appliance is still running, to e ectively remove all remaining hair. Run the tap water
over all gaps and each of the 3 head openings.
Note
To extend the time that the appliance is cleaned under running water, you can
press the Cleaning button
twice to start the cleaning cycle again, once the
rst cycle has ended.
If you want to stop the cleaning cycle, press the Cleaning button
once to
go back to the last cutting length selected. Clip the head back on to use the
appliance again.
• We recommend cleaning the appliance after each use and before putting it away.
If the LED display screen shows the Cleaning symbol
when you press the
button, this means that the appliance has not been cleaned following 15
minutes of continuous use. Press the Cleaning button
and clean the appliance
as described above.
After cleaning, we recommend pressing the Parking button
(see chapter on
storage) to store the appliance.
We strongly recommend adding a few drops of the oil that came with the
appliance to the blades after use, in order to keep the appliance in optimum
condition.
STORAGE
1
Check that the appliance is on and press the Parking button .
The Parking symbol is displayed on the LED display screen.
The appliance head unclips and goes back down, taking the combs with it, to go into
the Parking position, which is the ideal position in which to protect the appliance’s
blades and combs before storing.
Note
If the appliance has not been cleaned before you press the Parking button
, the
Cleaning symbol
ashes, reminding you to clean the appliance before you
store it.
2
Then put the still-damp appliance away on its stand.
MEMORY FUNCTION
The appliance has a Memory function that saves the last cutting length chosen.
When the appliance is started up, the combs will automatically return to the last selected
cutting height.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BaByliss SH500E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BaByliss SH500E in the language / languages: All languages as an attachment in your email.

The manual is 4,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info