by using the trimmer as soon
as you feel it is necessary. For
better results, we recommend
cutting the beard when it is dry.
This helps make the cut precise
and comfortable.
To determine the shape of the
beard
After having combed your
beard in the direction of its
natural growth, decide on
the desired shape by starting
under the jaw. Come back up
each side towards the ears.
Then continue on your cheeks
towards the hair. Make sure you
always trim or style your beard
against the hair growth.
To create a 3-day-beard eect...
The special 3-day-beard cutting
guide is a guide especially
designed to ensure ne cuts
(short) and in particular 3-day
beards. It simply ts onto the
main guide and is just as easily
removed* when trimming
around the nose, lips or ears.
*To remove, press the oval
located near the two lines and
at the same time pull the guide
in front of the main guide.
(Fig. 7-8))
To thin the moustache,
sideburns, goatee, jaw line…
Place the end of the blade
without comb guide in the line
of the cut desired.
NOTE! Only use in the opening
of the nostrils or ears to avoid
any risk of injury.
MAINTENANCE
Remove the cutting guide after
each use.
Cleaning the clipper blades
regularly will maintain their
optimal performance.
Removable blades
To make cleaning easier, the
BaByliss trimmer blades can
be removed. Make sure the
trimmer is turned o and then
remove the comb guide. Hold
the trimmer with the blades
facing up and remove them
by pressing on the tips of the
blades (Fig. 10).
Carefully brush the blades
using the cleaning brush to
remove hair.
Self-lubricating blades
The blades of your trimmer
have a reservoir pad for
releasing the necessary amount
of oil for proper operation
of your trimmers, time after
time. Nevertheless, it is
recommended that it be relled
occasionally when you notice
performance is not as high.
Remove the blades as described
above.
Squeeze a few drops of BaByliss
oil onto the pad (Fig. 11).
Then replace the blades on the
trimmer.
The BaByliss oil is specially
formulated for the trimmer, it
does not evaporate nor does it
slow the blades.
It is possible to obtain
replacement blades when these
are worn out or damaged.