9
To thin you hair, take a section of
hair (rest your little and ring ngers
on your scalp, using the middle
and index ngers to set the length),
hold 1 to 2 cm below the cutting
length. Then, using the clipper, cut
the section of hair steeply and at an
angle to create a saw-toothed ‘edge’.
MAINTENANCE
Remove the cutting guide after each
use.
Cleaning the clipper blades
regularly will maintain their optimal
performance.
Removable blades
To make cleaning easier, the BaByliss
clipper blades can be removed. Make
sure the clipper is turned o. Hold
the clipper with the blades pointing
up and remove them by pressing the
top of the blade. (Fig. 7)
Brush the blades using the cleaning
brush to remove any hair.
Self-lubricating blades
The blades of your clipper have
a reservoir pad that dispenses
the amount of oil necessary for
your clipper to operate properly,
every time. It is nevertheless
recommended that you occa-
sionally rell, when you notice the
clipper isn’t performing as well.
Remove the blades as described
above.
Carefully squeeze a few drops of
BaByliss oil onto the pad. (Fig. 8)
Then put the blades back on the
clipper.
BaByliss oil is specially formulated
for clippers, it will not evaporate or
slow the blades down.
You can get new blades when these
are worn or damaged.
PRECISION CLIPPER
Patterning your hair and giving it
a perfect nish
Your precision clipper comes with
an exclusive special short cut blade.
Its narrow size (7mm) enables you
to pattern your hair and beard with
great accuracy.
TURNING ON AND USING
1. To insert battery, remove
compartment cover by turning
bottom section of trimmer to the
left, then pulling straight down.
Insert one AA alkaline battery,
positive end up (Fig. 9). If you are
not going to use the unit for a long
period of time, or if the battery is
dead, remove the battery from the
unit. This will increase the life of
your trimmer.
2. After inserting battery, close
battery compartment and turn
unit to ON position (I).
