11
7. T
rouble-shooting
Problem: Solution:
No function 1. Check the power supply (battery pack/AC adapter) of the transmitter and receiver.
No transmission 1. Reduce the distance between the transmitter and the baby, maintaining the minimum
distance of 1 metre, or increase the response sensitivity (A6).
2. Reduce the distance between the transmitter and the receiver.
3. Check the setting of the channel selector switches (both on „A“ or „B“).
Interference/poor transmission: 1. Select a different transmission/reception channel.
2. Reduce the distance between the transmitter and the receiver.
3. Check the batteries/battery packs and replace if necessary.
Whistling (feedback): 1. Increase the distance between the transmitter and the receiver.
2. Reduce the volume on the receiver.
Noise: 1. Check the batteries/battery packs and replace if necessary.
2. Check the setting of the channel selector switches (both on „A“ or „B“).
External reception: 1. Switch to the other channel.
2. Vary the pilot signal on the transmitter and receiver.
If these suggestions do not solve the problems, please contact your Babyfon® dealer or our Hotline, tel.: +49 (0) 4102 231-235
or send an e-mail: Babyfon@vivanco.de
• Cleaning and maintenance:
Do not use strong detergents and never immerse the devices in water. Use a damp cloth to clean the surfaces or take the appliance
to your dealer. Do not place your Babyfon® in bright sunlight for prolonged periods and never on a cooking surface or other heat
source.
8. Package contents and specifications
1. Package contents:
1 transmitter, 1 receiver, 2 AC adapters, 3 AA battery packs
2. Specifications:
No. of channels: 2
Frequencies: Channel A: 40.68 MHz
Channel B: 40.69 MHz
Power supply: Transmitter: 6 Volt/ 200mA AC adapter
or 3 AA batteries
Receiver: 6 Volt/ 200mA AC adapter
or 3 AA batteries
Transmitting power: Max. 10 mW
The warranty is valid for 24 months from the date of purchase
Specifications subject to alteration. Babyfon® is a registered trademark of Vivanco Germany.
