661364

Baby Lock Valiant - BMV10 Manual

273
Zoom out
Zoom in
Previous page
1/316
Next page
APPENDIX
271
7
t
Use the clips to secure the cap.
1 Clips
• Attach the clips with their handles folded inward. If
the handles are pointed outward, they may be hit by
the machine’s presser foot.
→ This completes the positioning of the cap in the cap
frame.
u
Return the cap frame to its original
position.
• While pulling the lever behind the handle on the right
side of the mounting jig toward you, rotate the cap
frame to the left. After the cap frame has been rotated
90° and the brim points up, release the lever to lock
the cap frame in place.
1 Handle
2 Lever
v
Remove the cap frame from the mounting
jig.
To remove the cap frame from the mounting jig, place
both thumbs on the holders on the mounting jig,
grasping the handles on both the right and left side of
the cap frame, gently pulling toward you. As shown in
the illustration.
1 Holder
2 Handle
■ Attaching the cap frame to the
embroidery machine
The cap frame driver is required in order to attach
the cap frame to the embroidery machine. Before
attaching the cap frame to the machine, attach the
cap frame driver to the carriage. (Refer to “Installing
the cap frame driver” on page 262.)
Before attaching the cap frame, adjust the position
of the cap supports to fit the type (size) of cap to be
embroidered. To adjust move the cap supports to
the front or back depending on the cap size.
a
Loosen the four screws on the cap supports
two or three turns, and then move the cap
supports to a position where tension in the
cap will be maintained.
• Do not remove any of the screws, otherwise they may
be lost. Only turn the screws to slightly loosen them.
1 Cap supports
2 Screws
3 Low profile (shorter caps)
4 Standard (taller caps)
• Be sure to adjust both the right and left cap supports
to the same position.
… 273 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Valiant - BMV10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Valiant - BMV10 in the language / languages: English as an attachment in your email.

The manual is 15,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Valiant - BMV10

Baby Lock Valiant - BMV10 Additional guide - English - 1 pages

Baby Lock Valiant - BMV10 Additional guide - English, French, Spanish - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info