Manual Baby Lock Valiant - BMV10 (page 10 of 316) (English)

661364

Zoom out

Zoom in

1/316

1 Needle at the embroidering position

The needle is positioned over the hole in the

needle plate 2.

When starting the machine, the presser foot is

automatically lowered. The embroidery is sewn

and thread is pulled away from the material when

thread trimming and when changing thread colors

(moving to the different needles to be sewn within

the embroidery). When sewing is finished, the

machine stops. If the pattern uses eleven or more

thread colors, the machine will stop when it is

necessary for the thread spools to be changed, and

the corresponding instructions appear on the LCD.

(However, when “Manual needle bar sequences”

is set to “ON”, the machine does not automatically

stop when a thread spool must be changed. For

details, refer to “Selecting/Managing Thread Colors

for Each Needle Bar (Manual Color Sequence)” on

page 132.)

Differences from single-needle

machines

■ Can sew embroidery patterns using

ten or less colors without the need

to replace the thread spools

With single-needle machines, the thread spool must

be changed and the machine must be threaded each

time a different thread color is used. With this

machine, it is not necessary to change the thread

spool or rethread the machine with embroidery

patterns containing ten or less colors. If total colors

are less than ten colors, and if total color change is

more than eleven times, machine will come back to

the needle that the machine is already used and sew

the same color again automatically.

■ Automatic sewing reduces sewing

time

Except to change the thread spools with patterns

containing eleven or more colors, once the machine

is started, it continues to operate automatically, from

lowering the presser foot to performing the specified

operations at the starting and end positions in

addition to changing the thread colors. Since the

machine can change threads and finish stitching,

sewing time is reduced.

■ Automatically pulls and holds the

thread tails to the under side of

fabric at the beginning and end of

stitching

Since the machine automatically pulls the upper

thread under the fabric at the beginning of a color,

and pulls the upper thread from the fabric at the

time of thread trimming, you don’t need to deal with

the upper thread tail at all.

■ Automatically moves the embroidery

frame to the embroidering position

With a single-needle machine, in most cases, the

embroidery pattern is centered in the frame and the

fabric must be correctly positioned within the

embroidery frame with the center of the desired

embroidering position aligned with the center of the

embroidery frame. However, with 10 needle

embroidery machine, the embroidery frame is

moved to determine the embroidering position,

making it easier to sew the pattern at any place in

the frame. In addition, the embroidering position

can be freely determined manually as well as with

the camera positioning function after the fabric is

hooped and the embroidery frame is attached to the

machine, regardless of how the fabric is positioned

in the embroidery frame.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Valiant - BMV10 in the language / languages: English as an attachment in your email.

The manual is 15,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Valiant - BMV10

Baby Lock Valiant - BMV10 Additional guide - English - 1 pages

Baby Lock Valiant - BMV10 Additional guide - English, French, Spanish - 68 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Baby Lock Valiant - BMV10 Manual

Product: