661224
58
Zoom out
Zoom in
Previous page
1/112
Next page
56
UTILITY STITCHES — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Selecting Stitching
You can select any of the various types of stitching available.
Selecting stitching
Using the operation panel keys, select the desired
stitch.
Immediately after turning on the machine, the
straight stitch (left needle position) is selected. The
machine can also be set to select the straight stitch
(center needle position). For details, refer to
“Changing the initial needle stop position” (page 50).
The stitch pattern plate shows the stitches and the
stitch numbers. A letter (A, G, J, N or R) indicating
the presser foot that should be used appears below
the stitch number.
1 Stitch pattern plate
1
Determine the stitch that you wish to use.
Refer to the stitch pattern plate.
2
Determine which presser foot should be used
with the selected stitch.
The presser feet are stored in the accessory
compartment.
For details on the stitches that can be sewn
with the twin needle, refer to “Stitch
Settings” (page 94).
3
Attach the presser foot.
For details, refer to “Replacing the presser
foot” (page 33).
4
Turn on the sewing machine.
X When the machine is first turned on, “00”
will be displayed.
5
Press (Stitch selection key).
The number of the selected stitch is displayed.
Each press of increases the number by one.
After “9” ( “7” for the number on the left) is
reached, the number returns to “0”. Each press
of decreases the number by one. After “0”
is reached, the number returns to “9” (“7” for
the number on the left).
Pressing on the right changes the
second digit (ones), and pressing on the
left changes the first digit (tens).
X The stitch is selected.
6
If necessary, specify the setting for automatic
reverse/reinforcement stitching and adjust the
stitch length, etc.
For details on sewing with each of the utility
stitches, begin on page 58.
1
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Tempo - BLTP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Tempo - BLTP in the language / languages: English as an attachment in your email.

The manual is 5,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Tempo - BLTP

Baby Lock Tempo - BLTP Quick start guide - English - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info