661224
27
Zoom out
Zoom in
Previous page
1/112
Next page
Upper Threading 25
1
Threading the needle
This section describes how to thread the needle.
Note
The needle threader can be used with
sewing machine needles 75/11 through
100/16.
Thread with a thickness of 130/20 or thicker
cannot be used with the needle threader.
The needle threader cannot be used with
the wing needle or the twin needle.
If the needle threader cannot be used, refer
to “Threading the needle manually (without
using the needle threader)” (page 26).
1
Pull the end of the thread passed through the
needle bar thread guide to the left, and then
pass the thread through the thread guide disk
from the front.
1 Thread guide disk
2
Cut the thread with the cutter on the left side
of the machine.
1 Cutter
Note
If the thread is pulled through and cannot
be cut correctly, lower the presser foot so
that the thread is held in place before
cutting the thread. If this operation is
performed, skip step 3.
When using thread that quickly winds off the
spool, such as metallic thread, it may be
difficult to thread the needle if the thread is cut.
Therefore, instead of using the thread cutter,
pull out about 80 mm (approx. 3 inches) of
thread after passing it through the thread
guide disks (marked “7”).
1 80 mm (3 inches) or more
3
Lower the presser foot lever to lower the
presser foot.
1 Presser foot lever
4
Lower the needle threader lever on the left
side of the machine until it clicks, and then
slowly return the lever to its original position.
1 Needle threader lever
X The thread is passed through the eye of the
needle.
1
1
1
1
1
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Tempo - BLTP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Tempo - BLTP in the language / languages: English as an attachment in your email.

The manual is 5,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Tempo - BLTP

Baby Lock Tempo - BLTP Quick start guide - English - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info