661363
163
Zoom out
Zoom in
Previous page
1/184
Next page
TROUBLESHOOTING
How to Create Bobbin Work (Embroidery)
Embroidering E-97
E
3
Several solutions for minor problems are described below. If the problem persists, contact your nearest authorized
Baby Lock retailer.
The thread was accidentally cut
automatically and the bobbin thread
is caught inside the machine
a
Remove the embroidery frame.
b
Cut the thread near the fabric above the
needle plate, and then remove the fabric.
c
Remove the bobbin, and then hold it out
toward the left side of the machine.
d
Lower the embroidery foot.
e
Apply slight tension on bobbin thread by
holding thread out to the left side of
embroidery foot. Press the “Thread Cutter”
button again.
Correcting bobbin work tension
* If the top thread shows on the bobbin side of the
fabric, increase the upper tension (Refer to
“ADJUSTING THE THREAD TENSION” on
page E-96).
* If the top thread still shows on the bobbin side of the
fabric, reduce the tension of the bobbin thread or
bypass the bobbin tension. (Refer to “ADJUSTING
THE THREAD TENSION” on page E-96.)
* Some bobbin threads are too coarse to pass through
to wrong side of fabric. In this case, be sure to color
match top thread with bobbin threads.
Example: Embroidery patterns for bobbin work
a Correct tension
b The upper thread tension is too loose, or the
bobbin thread tension is too tight.
The bobbin thread catches on the
tension spring of the bobbin case
Embroider with no tension applied to the bobbin
thread. (Refer to “When tension is not applied to the
bobbin thread” on page E-91.)
TROUBLESHOOTING
CAUTION
Do not pull on the thread with excessive force,
otherwise the machine may be damaged.
163


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Spirit - BLPY at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Spirit - BLPY in the language / languages: English as an attachment in your email.

The manual is 14,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Spirit - BLPY

Baby Lock Spirit - BLPY Additional guide - English - 1 pages

Baby Lock Spirit - BLPY Quick start guide - English, French, Spanish - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info