Manual Baby Lock Sashiko 2 - BLQK2 (page 22 of 42) (English)

661219

Zoom out

Zoom in

1/42

Pulling Up the Bobbin Thread

1. After inserting the bobbin into the machine, turn the

handwheel towards you (counterclockwise) several

times until the eye of the needle catches and lifts up

the thread. (Fig. A)

2. Raise the presser foot.

3. Slide tweezers between the bottom of the presser

foot and needle plate from back to front to pull the

thread to the surface. (Fig. B)

4. Pull the thread to the left side of the needle plate.

(Fig. C)

5. Grasp and hold the thread tautly with the left hand,

turn the handwheel towards you (counterclockwise)

until the lower thread take-up lever catches the

thread. (Fig. D)

6. While still holding the thread taut use the right hand

to close the side cover. Draw the thread into the slot

of the thread cutter/holder located on the side

cover. If necessary, cut excess thread. (Fig. E)

NOTE: Bobbin thread will remain in only one of the

double eye thread guides of the bobbin case once the

bobbin thread has been pulled to the surface of the

machine.

ATTENTION: Do not sew without fabric under the

presser foot once the machine has been threaded.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Sashiko 2 - BLQK2 in the language / languages: English as an attachment in your email.

The manual is 5,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Baby Lock Sashiko 2 - BLQK2 Manual

Product: