661219
2
Zoom out
Zoom in
Previous page
1/42
Next page
"IMPORTANT SAFETY INSTRUCTIONS"
When using sashiko machine, basic safety precautions should always be followed,
including the following.
"Read all instructions before using this sashiko machine."
DANGER-To reduce the risk of electric shock.
1. The sashiko machine should never be left unattended when plugged in. Always unplug this sashiko
machine from the electrical outlet immediately after using and before cleaning.
WARNING- To reduce the risk of burns, fire, electric shock, or injury to persons.
1. Do not allow to be used as a toy. Close attention is necessary when the sashiko machine is used
by or near children.
2. Use this sashiko machine only for its intended use as described in this manual. Use only attach-
ments recommended by the manufacturer as contained in this manual.
3. Never operate this sashiko machine if it has a damaged cord or plug, if it is not working properly,
if it has been dropped or damaged, or dropped into water. Return the sashiko machine to the near-
est authorized retailer or service center for examination, repair, electrical or mechanical adjust-
ment.
4. Never operate the sashiko machine with any air openings blocked. Keep ventilation openings of
the sashiko machine and foot control free from the accumulation of lint, dust, and loose cloth.
5. Never drop or insert any object into any opening.
6. Do not use outdoors.
7. Do not operate where aerosol (spray) products are being used or where oxygen is being admin-
istered.
8. To disconnect, turn the main switch to the symbol "O" position which represents off, then remove
plug from outlet.
9. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
10. Keep fingers away from all moving parts. Special care is required around the sashiko machine
needle.
11. Always use the proper needle plate. The wrong needle plate can cause the needle to break.
12. Do not use bent needle and latch wire.
13. Do not pull or push fabric while stitching. It may deflect the needle causing it to break.
14. Switch the sashiko machine to the symbol "O" position when making any adjustments in the nee-
dle area, such as threading bobbin, changing needle, changing latch wire, or changing presser
foot, and the like.
15. Always unplug the sashiko machine from the electrical outlet when removing covers, lubricating,
or when making any of the user servicing adjustments mentioned in the instruction manual.
16. Keep fingers away from moving parts.
17. The appliance is not intended for use by young children or infirm persons without supervision.
18. Young children should be supervised to ensure that they do not play with the appliance.
"SAVE THESE INSTRUCTIONS"
"This sashiko machine is intended for household use."
I
N
T
R
O
D
U
C
T
I
O
N
1
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Sashiko 2 - BLQK2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Sashiko 2 - BLQK2 in the language / languages: English as an attachment in your email.

The manual is 5,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info