661213

Baby Lock Quest Plus - BLQ2-PL Manual

70
Zoom out
Zoom in
Previous page
1/104
Next page
69
Free motion embroidery
Mark the design to be embroidered on the fabric
with wash-out marker. Place fabric and stabilizer
in an embroidery hoop. Raise the needle to its
highest position and slide the hoop under the
needle. Lower the presser foot lever.
Hold the needle thread in the left hand; turn the
handwheel toward you to bring the bobbin thread
above the fabric surface. While holding both
threads firmly, take three to five straight stitches
in one spot.
Select zigzag stitch pattern and adjust the stitch
width as desired. Stitch along the outline of the
design by moving the embroidery hoop. Make
sure to maintain a constant speed.
Fill in the design working from the outline toward
the inside. Keep the stitches close together.
You will get longer stitches by moving the hoop
faster and shorter stitches by moving the hoop
more slowly.
Secure with reinforcement stitches at the end by
pressing the auto-lock button.
Free motion monogramming
Mark the letter or letters to be monogrammed on
the fabric with wash-out marker. Place fabric
and stabilizer in an embroidery hoop. Raise the
needle to its highest position and slide the hoop
under the needle. Lower the presser foot lever.
Hold the needle thread in the left hand; turn the
handwheel toward you to bring the bobbin thread
above the fabric surface. While holding both
threads firmly, take three to five straight stitches
in one spot.
Select zigzag stitch pattern and adjust the stitch
width as desired. Sew at a consistent speed along
the lettering.
Moving the hoop faster will produce a looser
stitched monogram; However moving the hoop
slower will result in a denser looking monogram.
Secure with reinforcement stitches at the end by
pressing the auto-lock button.
* Embroidery hoop is not included with the machine.
… 70 …


Need help? Post your question in this forum.

Forumrules
1

Forum

baby-lock-quest-plus---blq2-pl

Reset search

  • Post your question here. Please read the manual and previously asked questions to avoid duplicate questions. No registration needed. Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details. how can i register Submitted on 5-8-2022 at 16:34

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Quest Plus - BLQ2-PL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Quest Plus - BLQ2-PL in the language / languages: English as an attachment in your email.

The manual is 4,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Quest Plus - BLQ2-PL

Baby Lock Quest Plus - BLQ2-PL Quick start guide - English - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info