Manual Baby Lock Quest Plus - BLQ2-PL (page 60 of 104) (English)

661213

Zoom out

Zoom in

1/104

8. Cut the center of the buttonhole being careful

not to cut any buttonhole stitches on either

side. Use a pin as a stopper at the bartack to

prevent the stitching from being cut.

When sewing buttonholes on stretch fabric, hook gimp thread under the buttonhole foot.

1. Attach the buttonhole foot and hook the gimp

thread onto the back spur of the presser foot.

Bring the two gimp thread ends parallel to the

front of the foot and insert them into the

grooves, then temporarily tie them there.

Set the stitch width to match the diameter of the

gimp thread. Stitches will sew over top of thread.

Lower the presser foot and being sewing.

2. Once sewing is completed, carefully remove

gimp thread from buttonhole foot.

Pull the gimp thread gently to remove any slack,

then trim off any excess.

3. Pull the gimp thread to the wrong side of the

fabric using a hand sewing needle and tie.

Using a seam ripper, cut the middle part of the

gimp thread remaining at the top of the buttonhole.

Then trim off any excess

Note: It is suggested that you use inter-

facing on the backside of the fabric.

Making a buttonhole on stretch fabrics

Note: If the buttonhole lever is in the down

position and a stitch other than a buttonhole

is selected an animated warning message

to raise the lever will appear on the LCD

screen when the START/STOP button or

foot control is pressed.

Post your question here. Please read the manual and previously asked questions to avoid duplicate questions. No registration needed. Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details. how can i register Submitted on 5-8-2022 at 16:34
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Quest Plus - BLQ2-PL in the language / languages: English as an attachment in your email.

The manual is 4,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Quest Plus - BLQ2-PL

Baby Lock Quest Plus - BLQ2-PL Quick start guide - English - 18 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Baby Lock Quest Plus - BLQ2-PL Manual

Product: