661205
67
Zoom out
Zoom in
Previous page
1/90
Next page
62
Zipper Application
Machine setting
q Stitch pattern: A
w Stitch width: 5
e Stitch length: 1.5 – 4
r Thread tension: 3 – 6
t Presser foot: Zipper foot E
Attaching the zipper foot
A: To sew the left side of the zipper, attach zipper foot
with the right side pin.
B: To sew the right side of zipper, attach the zipper foot
with the left side pin.
q Groove
w Pin
q
w
q
w
e
r
t
(A)
(B)
To sew
Attach zipper foot with the right side pin.
z Fold under back seam allowance of garment.
Pin or baste zipper tape to under side of seam
allowance. Guide the edge of the zipper foot along
the zipper teeth and stitch through the garment and
zipper tape. See illustration.
Raise and release presser foot, and reattach it with the
left side pin.
x Close zipper and pin folded edge of front seam
allowance along the first stitching.
Start to sew just below zipper bottom stop, stitching
across fabric about 3/8” (1cm).
Turn fabric 90 degrees and sew up the length of the
zipper tape.
Before reaching the slider, stop machine with needle
in fabric and raise the foot.
Move the zipper slider down a few inches to clear a
path for stitching.
At the end of the seam, sew a few stitches in reverse
to lock the stitching.
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Molly - BL30A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Molly - BL30A in the language / languages: English as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info