Manual Baby Lock Lyric - BLMLR (page 126 of 140) (English)

661202

126

Zoom out

Zoom in

Previous page

1/140

Next page

Troubleshooting

A-10

d

Select stitch . At this time, increase the stitch length

and width to their maximum settings.

• For details on changing the settings, refer to “Setting

the stitch width” and “Setting the stitch length” in the

“Basic operations” section.

e

Slowly turn the handwheel toward you

(counterclockwise) and check that the needle bar and

feed dogs operate correctly.

If the needle or feed dogs contact the needle plate, the

machine may be malfunctioning; therefore, contact

your nearest authorized Baby Lock retailer.

f

Turn off the machine, and then install the bobbin and

presser foot.

• Refer to “Installing the bobbin” and “Replacing the

presser foot” in the “Basic operations” section.

g

Correctly thread the machine.

• For details on threading the machine, refer to “Upper

Threading” in the “Basic operations” section.

h

Perform trial sewing with cotton fabric.

When the thread became tangled under the

bobbin winder seat

If the bobbin winding starts when the thread is not passed

under the pretension disk of the bobbin-winding thread guide

correctly, the thread may become tangled under the bobbin

winder seat.

In such a case, wind off the thread according to the following

procedure.

1 Thread

2 Bobbin winder seat

a

If the thread become tangled under the bobbin winder

seat, press the “Start/Stop” button once to stop the

bobbin winding.

When the foot controller is plugged in, remove your

foot from the foot controller.

b

Cut the thread with scissors beside the bobbin-winding

thread guide.

1 Bobbin-winding thread guide

c

Slide the bobbin winder shaft to the left, and then

remove the bobbin from the shaft and cut the thread

leading to the bobbin in order to be able to completely

remove the bobbin from shaft.

Memo

• The thread may have become tangled as a result

of incorrect upper threading. Make sure that the

machine is correctly threaded.

Note

• Incorrect sewing may be the result of incorrect

upper threading or sewing thin fabrics. If there

are poor results from the trial sewing, check the

upper threading or the type of fabric being used.

1

2

CAUTION

• Do not remove the bobbin winder seat even if

the thread become tangled under the bobbin

winder seat. It may result in injuries.

• Do not remove the screw on the bobbin

winder guide post, otherwise the machine may

be damaged; you cannot wind off the thread

by removing the screw.

1 Screw of the bobbin winder guide post

1

1

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Baby Lock Lyric - BLMLR at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Lyric - BLMLR in the language / languages: English as an attachment in your email.

The manual is 8,2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info