661200
107
Zoom out
Zoom in
Previous page
1/140
Next page
Sewing the Various Built-in Decorative Patterns
Decorative sewing D-3
CHARACTER / DECORATIVE STITCHES
D
Character stitch patterns
Each press of changes the font in the following order.
ÆÆÆÆÆ...
Select the desired font, and then specify the numbers of
the desired characters.
Deleting a pattern
To remove a selected pattern, press on the operation
panel.
The selected pattern is removed.
Sewing attractive finishes
To achieve attractive results when sewing
character/decorative stitches, check the table below for the
proper fabric/thread/needle combinations.
Memo
When selecting a pattern from a category
containing over 100 patterns, the pattern can be
selected by entering its three-digit number (for
example, 001) without pressing . When one or
two digits are entered and if the pattern cannot be
selected with the entered number, press to
confirm the pattern number.
Memo
If a new pattern is selected without deleting the
previously selected one, the first and second
patterns are combined. (Refer to “Combining
patterns” on page D-5.)
If two patterns or more have been already
selected, the pattern that was selected last is
removed.
Note
Other factors, such as fabric thickness, stabilizer
material, etc., also have an effect on the stitch,
so you should always sew a few trial stitches
before beginning your project.
It may be necessary to adjust the pattern,
depending on the type of fabric being sewn or
the sewing speed. Adjust the pattern while
sewing trial stitches on a scrap piece of fabric
that is the same as what is used in your project.
Refer to “Realigning the pattern” on page D-10.
When sewing satin stitch patterns, there may be
shrinking or bunching of stitches, so be sure to
attach a stabilizer material.
Guide the fabric with your hand to keep the
fabric feeding straight and even during sewing.
Fabric When sewing on stretch fabrics, lightweight
fabrics, or fabrics with coarse weaves, attach
stabilizer on the wrong side of the fabric. An
alternative would be to place the fabric on thin
paper such as tracing paper.
1 Fabric
2 Stabilizer
3 Thin paper
Thread #50 - #60
Needle With lightweight, regular, or stretch fabrics: the Ball
point needle (golden colored) 90/14
With heavyweight fabrics: home machine needle
90/14
Presser foot Monogramming foot “N”.
Using zigzag foot “J” or other presser feet may
give inferior results.
Twin needle You can sew with twin needle (2.0/11) when you
select 7 mm satin stitch pattern. In this case, use
zigzag foot “J”.
107


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Katherine - BL210A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Katherine - BL210A in the language / languages: English as an attachment in your email.

The manual is 8,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Katherine - BL210A

Baby Lock Katherine - BL210A Quick start guide - English - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info