661200
88
Zoom out
Zoom in
Previous page
1/140
Next page
Appliqué, Patchwork and Quilt Stitching
S-30
Using the quilting guide (sold separately with
some models)
Use the quilting guide to sew parallel stitches that are
equally spaced.
a
Insert the stem of the quilting guide into the hole at the
rear of the walking foot or presser foot holder.
Walking foot
Presser foot holder
b
Adjust the stem of the quilting guide so that the guide
aligns with the seam that has already been sewn.
Free motion quilting
We recommend attaching the foot controller and sewing at a
consistent speed. You can adjust the sewing speed with the
speed control slide on the machine.
Using free motion open toe quilting foot “O”*
or quilting foot*
* Sold separately with some models.
The free motion open toe quilting foot “O” or quilting foot
is used for free motion quilting with zigzag or decorative
stitches or for free motion quilting of straight lines on
fabric with an uneven thickness. Various stitches can be
sewn using free motion open toe quilting foot “O”. For
details on the stitches that can be used, refer to “Stitch
Setting Chart” in the “Basic operations” section.
a
Slide the feed dog position switch, located at the rear
of the machine on the base, to (to the left as seen
from the rear of the machine).
1 Feed dog position switch (as seen from the rear of the
machine)
The feed dogs are lowered.
b
Select a stitch.
c
Remove the presser foot holder.
For details, refer to “Removing and attaching the
presser foot holder” in the “Basic operations”
section.
d
Attach free motion open toe quilting foot “O” by
positioning the pin of the quilting foot above the
needle clamp screw and aligning the lower-left of the
quilting foot and the presser bar.
1 Pin
2 Needle clamp screw
3 Presser bar
CAUTION
With free motion quilting, control the feeding
speed of the fabric to match the sewing speed.
If the fabric is moved faster than the sewing
speed, the needle may break or other damage
may result.
Memo
On models equipped with the free motion sewing
mode, the presser foot can be adjusted to the
best height for free motion sewing. For details,
refer to “Sewing with free motion mode” in the
“Basic operations” section.
Free motion open
toe quilting foot “O”
Quilting foot
Note
Make sure that the quilting foot is not slanted.
a
1
2
3
88


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Katherine - BL210A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Katherine - BL210A in the language / languages: English as an attachment in your email.

The manual is 8,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Katherine - BL210A

Baby Lock Katherine - BL210A Quick start guide - English - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info