661200
46
Zoom out
Zoom in
Previous page
1/140
Next page
Setting the Stitch
B-38
Setting the thread tension
You may need to change the thread tension, depending on the
fabric and thread being used.
Correct thread tension
The upper thread and the bobbin thread should cross near
the center of the fabric. Only the upper thread should be
visible from the right side of the fabric, and only the
bobbin thread should be visible from the wrong side of the
fabric.
1 Wrong side of fabric
2 Right side of fabric
3 Upper thread
4 Bobbin thread
Upper thread is too tight
If the bobbin thread is visible from the right side of the
fabric, the upper thread is too tight.
Loosen the thread tension.
1 Wrong side of fabric
2 Right side of fabric
3 Upper thread
4 Bobbin thread
5 The bobbin thread is visible from the right side of the
fabric.
Upper thread is too loose
If the upper thread is visible from the wrong side of the
fabric, the upper thread is too loose.
Tighten the thread tension.
1 Wrong side of fabric
2 Right side of fabric
3 Upper thread
4 Bobbin thread
5 The upper thread is visible from the wrong side of the
fabric.
Adjusting the thread tension
Using thread tension key (For models equipped with
thread tension key. Refer to page B-6)
Use the “-” and “+” keys.
Each time the “-” key is pressed less tension is applied.
Each time the “+” key is pressed more tension is applied.
Using thread tension dial (For models equipped with
thread tension dial. Refer to page B-6)
Pushing the thread tension dial toward the left makes the
thread tension looser.
Note
If the bobbin thread was incorrectly threaded, the
upper thread may be too tight. In this case, refer
to “Installing the bobbin” on page B-16 and
rethread the bobbin thread.
Note
If the upper thread was incorrectly threaded, the
upper thread may be too loose. In this case, refer
to “Upper Threading” on page B-19 and rethread
the upper thread.
1
2
3
4
1
2
3
4
5
Note
If the upper thread is not threaded correctly or
the bobbin is not installed correctly, it may not
be possible to set the correct thread tension. If
the correct thread tension cannot be achieved,
rethread the upper thread and insert the bobbin
correctly.
Memo
Press to return the setting to its default.
5
1
2
3
4
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Katherine - BL210A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Katherine - BL210A in the language / languages: English as an attachment in your email.

The manual is 8,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Katherine - BL210A

Baby Lock Katherine - BL210A Quick start guide - English - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info