661200
41
Zoom out
Zoom in
Previous page
1/140
Next page
Sewing
Basic operations B-33
STARTING TO SEW
B
Sewing a stitch
a
Turn the main power to ON and push (Needle
position button) to raise the needle.
b
Select the desired stitch following the procedure
described in “Selecting a stitch pattern” above.
c
If necessary, specify the setting for automatic reverse/
reinforcement stitching and adjust the stitch length,
etc.
For details on adjusting the stitch width and length,
refer to “Setting the stitch width” on page B-37 and
“Setting the stitch length” on page B-37.
d
Install the presser foot.
For details on changing the presser foot, refer to
“Replacing the Presser Foot” on page B-29.
e
Set the fabric under the presser foot. Hold the fabric
and thread with your left hand, and rotate the
handwheel counterclockwise or press (needle
position button) to set the needle in the sewing start
position.
f
Lower the presser foot.
You do not have to pull up the bobbin thread.
g
Adjust the sewing speed with the sewing speed
controller.
You can use this controller to adjust sewing speed
during sewing.
1 Fast
2 Slow
h
Press the “Start/Stop” button to start sewing.
Guide the fabric lightly by hand.
i
Press the “Start/Stop” button again to stop sewing.
j
Press the (Thread cutter button) to trim the upper
and lower threads.
1 Thread cutter button
The needle will return to the up position
automatically.
Note
When a stitch is selected, the icon for the
presser foot that should be used appears on the
screen. Check that the correct presser foot is
attached before starting to sew. If the wrong
presser foot is installed, attach the correct
presser foot.
CAUTION
Always use the correct presser foot. If the
wrong presser foot is used, the needle may
strike the presser foot and bend or break,
possibly resulting in injury.
Refer to page B-44 for presser foot
recommendations.
Memo
The black button on the left side of presser foot
“J” should be pressed only if the fabric does not
feed or when sewing thick seams. For details,
refer to “Sewing thick fabrics” in the “Sewing”
section. Normally, you can sew without pressing
the black button.
Memo
When the foot controller is being used, you
cannot start sewing by pressing the “Start/Stop”
button.
b
a
1
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Katherine - BL210A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Katherine - BL210A in the language / languages: English as an attachment in your email.

The manual is 8,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Katherine - BL210A

Baby Lock Katherine - BL210A Quick start guide - English - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info