661200
31
Zoom out
Zoom in
Previous page
1/140
Next page
Upper Threading
GETTING READY
Basic operations B-23
B
d
While lightly holding the upper thread with your left
hand, press (Needle position button) twice to raise
the needle.
The bobbin thread is looped around the upper thread
and can be pulled up.
e
Carefully pull the upper thread upward to pull out the
end of the bobbin thread.
f
Pull up the bobbin thread, pass it under the presser
foot and pull it about 10 cm (4 inches) toward the back
of the machine, making it even with the upper thread.
g
Reattach the bobbin cover.
Insert the tab in the lower-left corner of the bobbin
cover, and then lightly press down on the right side.
Using the twin needle
With the twin needle, you can sew two parallel lines of the
same stitch with two different threads. Both upper threads
should have the same thickness and quality. Be sure to use the
twin needle, the horizontal spool pin and the appropriate
spool cap.
For details on the stitches that can be sewn with the twin
needle, refer to “Stitch Setting Chart” beginning on page B-44.
a
Install the twin needle.
For details on installing a needle, refer to “Replacing
the needle” on page B-27.
b
Thread the upper thread for the left needle eye.
For details, refer to steps
a through l of
“Threading the upper thread” on page B-19.
c
Manually thread the left needle with the upper thread.
Pass the thread through the eye of the needle from the
front.
1
2
Memo
Traditionally a twin needle is also used for creating
pintucks. Contact your nearest authorized Baby
Lock retailer to obtain the optional pintuck foot for
your machine (ESG-PF).
CAUTION
Only use the twin needle (2.0/11 needle, part
code: X59296-121). Use of any other needle
may bend the needle or damage the machine.
Never use bent needles. Bent needles can
easily break, possibly resulting in injuries.
The needle threader cannot be used with the
twin needle. If the needle threader is used with
the twin needle, the machine may be
damaged.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Katherine - BL210A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Katherine - BL210A in the language / languages: English as an attachment in your email.

The manual is 8,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Katherine - BL210A

Baby Lock Katherine - BL210A Quick start guide - English - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info