661199
303
Zoom out
Zoom in
Previous page
1/312
Next page
TROUBLESHOOTING
Maintenance and Troubleshooting
Appendix A-17
A
1
Embroidery pattern
does not sew out
correctly
Fabric is hanging off the table. If the fabric is hanging off the table during
embroidery, the embroidery unit will not
move freely. Place the fabric so that it does
not hang off the table or hold the fabric to
keep it from dragging.
E-21
Fabric is snagged or caught on something. Stop the machine and place the fabric so that
it does not get caught or snagged.
Embroidery frame was removed during sewing
(for example, to reset the bobbin). The presser
foot was bumped or moved while removing or
attaching the embroidery frame, or the
embroidery unit was moved.
If the presser foot is bumped or the
embroidery unit is moved during sewing, the
pattern will not turn out. Be careful when
removing or reattaching the embroidery
frame during sewing.
E-26
Stabilizer is incorrectly attached, for example, it
is smaller than the embroidery frame.
Attach the stabilizer correctly. E-11
Loops appear on the
surface of the fabric
when embroidering
The thread tension is incorrectly set. Adjust the thread tension. E-30 to E-32
The tension of the upper thread is incorrectly
set for the combination of the fabric, thread and
pattern being used.
Use the embroidery needle plate cover. E-22
The combination of the bobbin case and
bobbin thread is incorrect.
Change the bobbin case or bobbin thread so
that the correct combination is used.
E-21
Embroidery unit does
not operate
There is no pattern selected. Select a pattern. E-3, E-58
Main power switch is not turned on. Turn the main power to ON. B-19
Embroidery unit is not attached correctly. Reattach the embroidery unit correctly. B-64
Embroidery frame was attached before the unit
was initialized.
Perform the initialization process correctly. B-64
CAUTION
This machine is equipped with a thread detection device. If the “Start/Stop” button is pushed before the
upper threading is done, the machine will not operate properly. Also, depending on the pattern selected,
the machine may feed the fabric even if the needle is raised. This is due to the needle bar release
mechanism. At these times, the machine will make a sound different from what is made during normal
sewing. This is not the sign of a malfunction.
If the power is disconnected during sewing:
Turn the main power to OFF and unplug the machine.
If you restart the machine, follow the instructions for operating the machine correctly.
Problem Cause Solution Page
303


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Journey - BLJY at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Journey - BLJY in the language / languages: English as an attachment in your email.

The manual is 10,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Journey - BLJY

Baby Lock Journey - BLJY Quick start guide - English - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info