661199
279
Zoom out
Zoom in
Previous page
1/312
Next page
PREPARING FOR BOBBIN WORK
How to Create Bobbin Work (Embroidery)
Embroidering E-91
E
3
When tension is not applied to the
bobbin thread
If the bobbin thread in the trial stitching is too tight
and adjusting the bobbin case tension does not help,
do not pass the thread through the tension spring.
Hold the bobbin with your left hand so the thread
unwinds from the right side and hold the end of the
thread with your right hand.
n
Pull out about 8 cm (approx. 3 inches) of
bobbin thread.
o
Lightly hold the end of the upper thread
while turning the handwheel toward you
(counterclockwise) until the mark on the
handwheel aligns with the center top of
machine.
p
Gently pull the upper thread to bring the
bobbin thread up through the needle plate.
A loop of the bobbin thread comes out through the
hole in the needle plate.
q
Insert tweezers through bobbin thread loop
and pull bobbin thread above the needle
plate.
r
Align the upper thread and bobbin thread,
and then pull out about 10 cm (approx.
4 inches) of the threads and pass them
under the embroidery foot toward the rear
of the machine.
s
Install the bobbin cover with tabs.
a Bobbin cover
This completes the upper and lower threading.
CAUTION
When creating bobbin work, use the bobbin
cover with tabs, otherwise the thread may
become tangled or the needle may break.
279


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Journey - BLJY at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Journey - BLJY in the language / languages: English as an attachment in your email.

The manual is 10,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Journey - BLJY

Baby Lock Journey - BLJY Quick start guide - English - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info