661197
16
Zoom out
Zoom in
Previous page
1/60
Next page
14
Quick Bobbin
Thread Device
Lift needle plate and open 1
bobbin door.
Place bobbin inside the bobbin case.2
Run thread through thread notch and
under latch spring, so that a length of
thread is exposed.
Always use the bobbin case that was
supplied with this machine. A secondary
bobbin case can be ordered from your
Baby Lock retailer.
Pull the latch lever of the bobbin 3
case out and push the bobbin case
into the shuttle race and release the
latch lever.
If the latch lever on the bobbin case is not
set securely on the hook, it may fly off during
sewing and cause lower thread breakage.
Rotate the handwheel one full rotation
towards you to check that the bobbin case is
set securely.
Pass the thread through the quick 4
bobbin thread device in the order
numbered 1 2, pull in the direction
of the arrow 3, then cut the thread.
Quick Bobbin Thread Device
This device cuts the bobbin thread
end to an appropriate length after the
bobbin has been replaced and holds it
at that length. Following this process
eliminates the need to manually pull the
bobbin thread through the hole in the
needle plate. Simply close the bobbin
case and continue the upper threading
process.
Bobbin Installation
Bobbin should be
positioned so it
winds to the left.
Latch Spring
Thread Notch
10 cm (4 inches)
2
1
2
1
Bobbin Door
Needle Plate
1
2
3
Lower slide plate and close 5
bobbin door, following numbers
1 2 above in order.
Bobbin Thread Setting Cover
When the fabric extension table is set in place
Open the bobbin thread setting cover
beforehand, then following the above
directions set the bobbin thread in
place. (You can set the bobbin thread
in place without removing the fabric
extension table.)
CAUTION – Moving parts –
To reduce risk of injury, turn the power to the machine off before servicing. Open covers.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Jane BL510A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Jane BL510A in the language / languages: English as an attachment in your email.

The manual is 9,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info