661197
13
Zoom out
Zoom in
Previous page
1/60
Next page
11
Changing Needles
Changing the Needle
Turn the sewing machine off. 1
Raise needle to highest position
using handwheel, and lower
presser foot.
Loosen screw with screwdriver, 2
and remove needle.
Hold the needle with the flat 3
side to the right, and insert the
needle as far as it will go. Make
sure needle is securely set in
the needle chamber by screwing
in tightly.
If the needle is not adequately
inserted or the screw is loose,
this may break the needle or
cause a breakdown and the
needle threader will not work.
Check needles on a flat surface
to make sure they are not bent.
Changing the Feed Pin
Set the feed dog to the “velvet” 1
position. (See page 10.)
Remove needle, presser foot 2
and needle plate.
Lower presser foot and turn 3
handwheel until feed pin is in its
highest position.
Insert small screwdriver 4
(included) as shown in diagram.
Note
HLX5 needles should be used; however, Schmetz 130/705H may also be •
used under normal circumstances.
Screwdriver
Flat surface
Lay needle on
a flat surface
(such as the needle
plate or a plate
of glass).
The needle should lay
parallel to a surface.
While holding spring with 5
fingertip, lower the feed pin
changer onto the needle to pick
it up.
Attach new feed pin to feed pin 6
changer, lower and attach while
holding spring with fingertip.
Remove screwdriver.7
Re-attach needle plate, needle 8
and presser foot.
CAUTION
Please make sure the power to the machine is turned off before carrying out the
following operations. There is a chance of injury if the machine accidentally starts
running during this operation.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Jane BL510A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Jane BL510A in the language / languages: English as an attachment in your email.

The manual is 9,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info