661196
19
Zoom out
Zoom in
Previous page
1/52
Next page
Changing Presser Feet
(Zipper Foot)
1 Raise presser foot, and raise
needle to highest position.
2 Loosen and remove screw using
screwdriver.
13
Changing Presser Feet
Note Make sure the power is off before changing presser feet.
Presser Feet
3 Attach zipper foot and tighten
screw.
Use the same method to attach
the other feet that come with your
BLQP.
See page 18 for directions on at-
taching the Walking Foot.
Use the position knob on back of
the zipper foot to adjust position
of foot in relation to needle.
Only the zipper foot has a posi-
tion knob. You can begin sewing
with all other presser feet imme-
diately after attaching.
Flex Reaction Foot
For perfect stitch-
ing on otherwise
difficult fabrics like
velvet, leather and
suede.
General purpose Foot
This foot is used for
most sewing. (Can also
be used for sewing
thick fabrics or seams.)
When sewing thick
seams, lightly guide
the fabric with your
hand on the down-
ward side of the seam.
Can also be used
with pin feeding.
Rolled Hem Foot
Use on the edge of
fabric, such as on
hems of dress
shirts, to fold the
edge of the fabric in
three while sewing.
Zipper Foot
Use to attach fasten-
ers other than con-
cealed fasteners.
Invisible Zipper
Foot
Use to attach con-
cealed fasteners.
1/4 Foot
For quilt and patch-
work piecing with
1/4 or 1/8 seam
allowance.
Quilting Foot
Spring action foot
for darning, quilting
or free-motion em-
broidery.
Walking Foot
For sewing or quilt-
ing on fabrics which
stick or tend to slip
Useful for sewing
multiple layers as in
quilting.
Use only feet supplied with your BLQP. Each foot is specially
designed for this machine and has clearance for the pin at the
rear of each foot. Use of other presser feet may damage or
break the pin feed mechanism.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Jane - BL500A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Jane - BL500A in the language / languages: English as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info