661196
15
Zoom out
Zoom in
Previous page
1/52
Next page
Quick Bobbin
Thread Device
1 Lift needle plate and open bob-
bin door.
2 Put bobbin into the bobbin case.
Run thread through thread notch and under
latch spring, so that a length of thread is ex-
posed.
Always use the bobbin case that was sup-
plied with this machine. A secondary bob-
bin case can be ordered from your dealer.
3
Pull the latch lever of the bobbin case
out and push the bobbin case into the
shuttle race and release the latch lever.
If the latch lever is not set securely on
the hook, it may fly off during sewing
and cause lower thread breakage.
Rotate the hand wheel one full rota-
tion towards you to check that the
bobbin case is set securely.
4 Pass the thread through the quick
bobbin thread device in the order
1
2, pull in the direction of the arrow
3, then cut the thread.
CAUTION Moving parts
To reduce risk of injury, switch power off before servicing. Open covers.
Bobbin Insertion
Bobbin should be
positioned so it
winds to the left.
Latch Spring
Thread Notch
2
1
9
Bobbin Door
Needle Plate
2
1
1
2
3
5 Lower slide plate and close bob-
bin door, following numbers
1
2 above in order.
Quick Bobbin Thread Device
This device cuts the bobbin thread end
to an appropriate length after the bob-
bin has been replaced and holds it at
that length, so the operation of pulling
out the thread can not be skipped.
Bobbin Thread Setting Cover
When the fabric extension table is set in place
Open the bobbin thread setting cover
beforehand, then set the bobbin
thread in place. (You can set the bob-
bin thread in place without removing
the fabric extension table.)
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Jane - BL500A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Jane - BL500A in the language / languages: English as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info