614493

Baby Lock Imagine BLE 1AT-2 Manual

45
Zoom out
Zoom in
Previous page
1/54
Next page
U
S
I
N
G
S
P
E
C
I
A
L
T
Y
T
H
R
E
A
D
S
43
Bypassing the Threading Port
C
B
D
A
Heavy weight threads can be used through your regular looper
thread paths. Specific techniques may require that the thread
bypass the thread port for the thread pull to be loosened. Start
with the machine threaded with regular serger thread.
1. Open front cover and raise the presser foot.
2. Just above the threading port, clip the looper thread to be
replaced. Pull the thread out of the upper guides and remove
the cone.
3. Place the specialty thread on the spool pin. Thread it into the
upper guides and clip it a couple of inches beyond the base
plate (fig. A).
4. With machine lock button released, use the tweezers to pull
the existing looper thread out of tube extending from the
threading mechanism (fig. B). Leave the thread in the loop-
er arm.
5. Tie the specialty thread onto the regular thread with an over-
hand knot (fig. C). Pull on the regular thread from the looper
eye until the specialty thread comes through the looper eye.
6. Place upper looper thread under the foot and to the left: clip
lower looper thread at the base plate.
If the thread is heavy and the overhand knot (step #5) is too
large for the looper tube, follow directions #1 thru #6 on page
43 to make a thread cradle. Then:
1. Release machine lock button.
2. While holding the loose ends of the thread cradle with one
hand, use the tweezers to pull the cradle loop out of the tube
extending from the threading mechanism with the other
hand.
3. Insert 2 inch(5cm) of your decorative thread into the cradle
loop. Pull on the loose ends of the thread cradle from the
looper eye until the specialty thread comes through the
looper eye. (fig.D)
0001.qxp:AT-2En Ta.qxd 09/05/29 13:23 Page 45
… 45 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Imagine BLE 1AT-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Imagine BLE 1AT-2 in the language / languages: English as an attachment in your email.

The manual is 4,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Imagine BLE 1AT-2

Baby Lock Imagine BLE 1AT-2 User Manual - Dutch - 59 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info