614493
20
Zoom out
Zoom in
Previous page
1/54
Next page
M
A
C
H
I
N
E
S
E
T
T
I
N
G
S
18
Disengaging the Upper Cutting Blade
Presser Foot Pressure Adjustment
Snap-On Presser Foot
Presser Foot
Release Button
Seam Line
Guides
When no trimming is desired, as when stitching on a fold, flip
the cutting blade lock switch clockwise to the LOCK position.
The cutting blade no longer moves up and down, but remains in
its lowered position. To re-engage the cutting blade, turn the
cutting blade lock switch half of a turn counter-clockwise. The
blade will start moving automatically when you start sewing.
The presser foot pressure has been preset at the factory and
rarely needs adjustment. You may find it necessary, however, to
decrease the pressure for thick fabrics or increase pressure for
thin fabrics to feed more smoothly under the foot. Use a coin to
turn the screw on top of the machine.
To increase pressure, turn the pressure adjusting screw clock-
wise.
To decrease pressure, turn the screw counterclockwise.
The Imagine has the convenience of a snap-on presser foot.
To Release:
1. Raise the presser foot lever.
2. Lower the cutting blade.
3. Raise the needles to the highest position.
4. Push the presser foot release lever located at the back of the
presser foot holder.
5. Carefully turn the presser foot clockwise 90 degrees.
6. Slide the presser foot to the rear to remove.
To Replace:
1. Raise the presser foot lever.
2. Lower the cutting blade.
3. Raise the needles to the highest position.
4. Slide the foot from the left to right.
5. Align the bar of the foot with the groove in the holder.
6. Lower the presser foot lever to snap into place.
The presser foot that comes with the Imagine has a tape sewing
slot. Insert the tape or ribbon, into the slot in the front of the foot,
then under the sole of the foot. (see page 41 for more instruction)
The raised markings on the toe of the foot are seam line guides.
They indicate the needle positions to help guide your fabric for
accurate seaming.
0001.qxp:AT-2En Ta.qxd 09/05/29 13:23 Page 20
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Imagine BLE 1AT-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Imagine BLE 1AT-2 in the language / languages: English as an attachment in your email.

The manual is 4,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Imagine BLE 1AT-2

Baby Lock Imagine BLE 1AT-2 User Manual - Dutch - 59 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info