661238
74
Zoom out
Zoom in
Previous page
1/100
Next page
Making Embroidery Adjustments
E-26
Adjusting thread tension
When embroidering, the thread tension should be set so that
the upper thread can slightly be seen on the wrong side of the
fabric.
Correct thread tension
The pattern can be seen from the wrong side of the fabric.
If the thread tension is not set correctly, the pattern will
not finish well. The fabric may pucker or the thread may
break.
1 Right side
2 Wrong side
Follow the operations described below to adjust thread
tension according to the situation.
Upper thread is too tight
The tension of the upper thread is too tight, resulting in the
bobbin thread being visible from the right side of the
fabric.
1 Right side
2 Wrong side
a
Press .
b
Press to weaken the upper thread tension. (The
tension number will decrease.)
c
Press .
Upper thread is too loose
The tension of the upper thread is too loose, resulting in a
loose upper thread, loose thread locks, or loops appearing
on the right side of the fabric.
1 Right side
2 Wrong side
a
Press .
b
Press to tighten the upper thread tension. (The
tension number will increase.)
Making Embroidery Adjustments
Note
If the thread tension setting is made extremely
weak, the machine may stop during sewing. This
is not the sign of a malfunction. Increase the
thread tension slightly, and begin sewing again.
Memo
If you turn the main power to OFF or select a
different pattern, the thread tension will reset to
the automatic setting.
When you retrieve a saved pattern, the thread
tension setting will be the same as when the
pattern was saved.
Note
If the bobbin thread was incorrectly threaded,
the upper thread may be too tight. In this case,
refer to “Setting the Bobbin” of “Basic
operations” and rethread the bobbin thread.
Note
If the upper thread was incorrectly threaded, the
upper thread may be too loose. In this case, refer
to “Upper Threading” of “Basic operations” and
rethread the upper thread.
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Flourish BLMFO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Flourish BLMFO in the language / languages: English as an attachment in your email.

The manual is 10,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Flourish BLMFO

Baby Lock Flourish BLMFO Quick start guide - English - 12 pages

Baby Lock Flourish BLMFO Additional guide - English - 44 pages

Baby Lock Flourish BLMFO Quick start guide - French - 12 pages

Baby Lock Flourish BLMFO Additional guide - French - 44 pages

Baby Lock Flourish BLMFO Quick start guide - Spanish - 12 pages

Baby Lock Flourish BLMFO Additional guide - Spanish - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info