614492

Baby Lock Evolve BLE8W Manual

87
Zoom out
Zoom in
Previous page
1/92
Next page
The fixed blade is made of a special long lasting steel and does not require frequent replacement. If neces-
sary, contact your nearest retailer for replacement of the blade.
The upper moving blade is made of a softer steel material and will require replacement. A spare blade is pro
-
vided with the machine for replacement if necessary. The spare blade is located on the thread spool stand
accessory compartment.
If for some reason your machine does not cut or perform as it should be, please take your machine to your
nearest Baby Lock retailer. It is possible that the result of poor cutting may indicate other problems.
M
A
I
N
T
E
N
A
N
C
E
85
Replacing Cutting Blades
A
B
TO REPLACE MOVING BLADE proceed as follow;
1. For safety reasons, unplug main power cord.
2. Open front cover and cutting blade cover (fig. A):
3. Remove screw and moving blade (fig. B).
4. Insert new blade into blade slot.
5. Insert screw and place moving blade to its highest position.
6. Hold blade in place and tighten screw.
7. Check and make sure that the top section of cutting blade is set below
the fixed blade when moving blade is in its lowest position.
8. Close cutting blade cover and front cover.
Replacing Light Bulb
1. For safety reasons, unplug main power cord prior of replacing light bulb.
2. Open front cover and cutting blade cover.
3. Remove light bulb and replace bulb with the same type rated (15watts/110volts or 15watts/240volts).
See below draft for reference.
15W/110V
(Screw Type)
15W/240V
(Bayonet Typel)
… 87 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Evolve BLE8W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Evolve BLE8W in the language / languages: English as an attachment in your email.

The manual is 4,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info