Manual Baby Lock Evolve BLE8W (page 73 of 92) (English)

614492

Zoom out

Zoom in

1/92

The flatlock stitch need not be limited at seamlines.

When sewn on a fold, flatlocking can create attractive decorative effects

within the body of a garment or project. Either follow placement lines on

your pattern or design your own special effects by stitching the fabric

before laying out pattern pieces.

1. Set the machine for 2-thread flatlock - wide. (See page 36.)

2. Turn the cutting blade lock switch clockwise to disengage the upper

cutting blade.

3. Set the stitch length to desired setting.

4. Fold the fabric (right side or wrong side out, depending on the loop

or ladder stitch you want to show) along stitch placement lines.

5. Position the fabric under the presser foot, aligning the fold of the fab-

ric 1/8 inch (3.5mm) to the left of the upper cutting blade (fig A). (See

note).

6. Stitch to the desired ending point.

7. Clear the stitch fingers and chain off the fabric (fig B).

8. Clip threads, leaving a 3-4 inch (7.5-10cm) chain.

9. Gently pull the fabric to flatten the stitches (fig C).

10. Separate the chain threads and thread them through a needle and

pull them to the fabric back side. If necessary, tie a knot to secure

the threads (fig D).

Note: If the fabric does not pull completely flat under the stitches, guide

the fabric fold to the left so that the loops hang slightly off the fold as they

are being stitched.

Flatlock "Decorative" - Overlock

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Evolve BLE8W in the language / languages: English as an attachment in your email.

The manual is 4,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Baby Lock Evolve BLE8W Manual

Product: