C
O
M
B
I
N
A
T
I
O
N
T
I
T
C
H
E
X
P
R
E
S
S
I
V
E
58
7-Thread Wave Stitch
7-Thread Wave Stitch is a combined stitch of 3-Thread Wave and 4-Thread triple cover stitch.
This stitch looks gorgeous with decorative threads appearing on wave stitch and triple cover stitch.
For the 7-Thread Wave Stitch:
1. Use standard blade cover.
2. Thread upper looper according to either 3-thread wave stitch or 3-thread rolled wave stitch.
(See page 41 or 42.) Thread the lower looper in the standard lower looper thread path. (See
illustration below.)
3. Thread chain looper.
4. Thread C-1, C-2, C-3, and O-2 (right) needle positions.
5. Engage the blade to cut the fabric.
6. Select B on the Stitch Selector for 3-thread wave. (Select C for 3-thread rolled wave.)
7. Move the Wave Selector lever from "O" to "W".
The stitch selection charts in the back of the manual have other combination of stitches such as:
6-Thread Wave - wide (cover stitch wide with 3-thread wave)
6-Thread Wave - narrow(cover stitch narrow with 3-thread wave)
5-Thread Wave - (chain stitch with 3-thread wave)
(For proper settings, see chart on page 88/89.)
All these stitch combinations work in the same manner as the 7-Thread Wave Stitch. See next
page for pictures of the various stitch combinations.
Note: Due to the change in the lower looper telescopic thread path, always sew the 7-thread
Wave or 7-thread Rolled Wave Stitch at a slow speed to avoid the thread getting tangled while
sewing.
