661340
154
Zoom out
Zoom in
Previous page
1/312
Next page
SELECTING/EDITING/SAVING PATTERNS
152
Concerning optional embroidery cards
Do not disassemble or alter the embroidery cards.
Do not forcefully bend, drop, scratch or place heavy objects on top of the embroidery cards.
Do not allow the embroidery cards to become wet, such as with water, solvents, drinks or
any other liquids.
Do not use or store the embroidery cards in a location exposed to strong static electricity or
electrical interference.
Do not use or store embroidery cards in locations exposed to vibrations or impacts, direct
sunlight, extreme dust (or lint), high temperatures, high humidity, severe temperature
fluctuations, or strong magnetic forces (such as from speakers).
To use optional embroidery cards to recall embroidery patterns, connect the embroidery card
reader/USB card writer module* to this machine.
Store embroidery cards in their protective cases.
If an embroidery card other than our original embroidery cards are used, the embroidery
machine may not operate correctly. Be sure to use only recommended embroidery cards.
Some licensed or copyright embroidery cards cannot be used with this embroidery machine.
Embroidery cards sold overseas cannot be used with this embroidery machine.
Only insert or remove embroidery cards while an access lamp on the embroidery card
reader/USB card writer module* is not flashing, or while the embroidery machine is turned
off (refer to page 164).
* If you have purchased the Palette Ver5 or later, Palette Petite or Palette PTS, you can plug the included USB
card writer module into the machine as an embroidery card reader, and recall patterns.
Concerning USB media
Do not disassemble or alter the USB media.
Do not allow the USB media to become wet, such as with water, solvents, drinks or any other
liquids.
Do not use or store the USB media in a location exposed to strong static electricity or
electrical interference.
Do not use or store USB media in locations exposed to vibrations or impacts, direct sunlight,
extreme dust (or lint), high temperatures, high humidity, severe temperature fluctuations, or
strong magnetic forces (such as from speakers).
While embroidery data is being recalled from the USB media, do not allow the machine to be
exposed to vibrations or impacts, and do not attempt to remove the USB media from the machine.
Some USB media may not be usable with this machine. Please visit our web site
“www.babylock.com” for more details.
Only remove USB media while an access lamp on the USB media is not flashing (refer to
page 172).
For additional information, refer to the instruction manual included with the USB media that
you have purchased.
Do not unplug a USB device/media from this machine immediately after it has been plugged
in. Be sure to wait at least 5 seconds before unplugging the USB device/media.
154


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Enterprise - BNT10L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Enterprise - BNT10L in the language / languages: English as an attachment in your email.

The manual is 19,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Enterprise - BNT10L

Baby Lock Enterprise - BNT10L Quick start guide - English, French, Spanish - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info