661340
53
Zoom out
Zoom in
Previous page
1/312
Next page
Attaching the Embroidery Frame to the Machine 51
2
8. Attaching the Embroidery Frame to the Machine
After hooping the fabric in the embroidery frame, attach the frame to the embroidery machine. Embroidery
frame holders A and B are included accessories with this machine.
Install embroidery frame holder A when an included embroidery frame is to be used. (See “Correctly Using
the Embroidery Frames” on page 90 for the details about the embroidery frame holders.)
CAUTION
Note
Before attaching the embroidery frame, check that there is enough thread in the bobbin.
Attaching the embroidery frame
Adjust the width of the embroidery frame holder to the size of the embroidery frame, and then attach the
embroidery frame to the machine. As an example, the procedure for attaching the small embroidery frame is
described below.
1 Left arm of embroidery frame holder
Move the arm of the embroidery frame holder
to the left or right to adjust it to the size of the
embroidery frame.
2 Clip on embroidery frame holder.
Insert the embroidery frame into the clips on the
embroidery frame holder.
3 Positioning pin
4 Holes
5 Positioning slots
1
Loosen the two thumb screws on the
embroidery frame holder.
If the screw is too tight, please use the
included disc-shaped screwdriver.
1 Left arm
2 Thumb screws
X The left arm of the embroidery frame
holder can be moved.
Only loosen the thumb screws a maximum
of 2 turns counterclockwise. Do not
remove the screw.
If the embroidery frame is not correctly attached it may hit the presser foot and damage
the machine, or cause injury to the user.
When attaching the embroidery frame, make sure that the start/stop button is lit in red. If
the start/stop button is flashing in green, the embroidery machine may start sewing. If the
embroidery machine accidentally starts operating, injuries may result.
When attaching the embroidery frame, make sure that the embroidery frame does not hit
any other part of the embroidery machine.
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Enterprise - BNT10L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Enterprise - BNT10L in the language / languages: English as an attachment in your email.

The manual is 19,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Enterprise - BNT10L

Baby Lock Enterprise - BNT10L Quick start guide - English, French, Spanish - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info