661257
23
Zoom out
Zoom in
Previous page
1/238
Next page
GETTING READY ——————————————————————————————————————————————————
6
Setting Up the Machine
The procedures for setting up the machine are described below. If the machine is not set up correctly, it may
shake or produce loud noises and the embroidery will not be sewn correctly. An optional sewing stand is also
available.
Setup and transporting precautions
The temperature of the operating environment should be between 5 °C (40 °F) and 40 °C
(104 °F) . If the machine is operated in an environment that is either too cold or too hot, the
machine may malfunction.
Do not use the machine in a location where it will be exposed to direct sunlight, otherwise
the machine may malfunction.
Set up the machine with four feet completely in contact with the desk or table, so that the
machine is level.
Do not put anything under the embroidery machine that could block the ventilation slots at
the bottom toward the back and do not allow lint or dust to accumulate in the ventilation
slots, otherwise the machine’s motor may overheat, resulting in a fire or in damage to the
machine.
The machine weight is approximately 37 kg (81 Ibs.). The transporting or setting up of the
embroidery machine should be performed by two people.
When transporting the machine, be sure to lift it from the bottom at the indicated positions by
two people. Lifting the machine from any other area may damage the machine or result in the
machine falling, which could cause injuries.
When lightning occurs, turn off the machine and unplug the power supply cord. Lightning
may cause the machine to malfunction.
Do not plug in the power supply cord until setup of the machine is completed, otherwise
injuries may result if the start/stop button is accidentally pressed and the machine starts
sewing.
When lubricating the machine, wear protective eyeglasses and gloves to prevent the oil or
grease from getting into your eyes or on your skin. Do not put the oil or grease into your
mouth. Keep the oil and grease out of the reach of children.
CAUTION
23


Need help? Post your question in this forum.

Forumrules
1

Forum

baby-lock-embroidery-professional---bmp8

Reset search

  • So I’m doing key chains and in order to embroider multiples, I insert one design then merge another and so on. It’s only three colors however I don’t know how to set up the machine to run one color first for all as oppose of the machine doing each one and going through all three colors then the next key chain, all three colors and so on. Do I make sense? Submitted on 3-6-2022 at 06:06

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Embroidery Professional - BMP8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Embroidery Professional - BMP8 in the language / languages: English as an attachment in your email.

The manual is 10,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Embroidery Professional - BMP8

Baby Lock Embroidery Professional - BMP8 Quick start guide - English, French, Spanish - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info