Manual Baby Lock Embroidery Professional - BMP8 (page 10 of 238) (English)

661257

Zoom out

Zoom in

1/238

Machine Structure and Features ix

Not all six needles can be used to sew at the same

time. Only one needle is moved to the embroidering

position at a time. According to the sewing order, the

needle bar case is moved to the left and right so that

the needle bar and needle thread with the required

color can be moved to the embroidering position.

1 Needle at the embroidering position

The needle is positioned over the hole in the

needle plate 2.

When starting the machine, the presser foot is

automatically lowered, and the embroidery is sewn

while performing pulling thread from the materials at

the thread trimming and while changing thread

colors (moving the needle to be sewn within the

embroidering). When sewing is finished, the

machine stops. If the pattern uses seven or more

thread colors, the machine will stop when it is

necessary for the thread spools to be changed, and

the corresponding instructions appear on the LCD.

Differences with single-needle

machines

■ Can sew embroidery patterns using six or less

colors without the need to replace the thread

spools

With single-needle machines, the thread spool

must be changed and the machine must be

threaded each time a different thread color is

used. With this machine, it is not necessary to

change the thread spool or rethread the machine

with embroidery patterns containing six or less

colors. If total colors are less than 6 colors, and if

total color change is more than 7 times, machine

will come back to the needle that the machine is

already used and sew the same color again

automatically.

■ Automatic sewing reduces sewing time

Except to change the thread spools with patterns

containing seven or more colors, once the

machine is started, it continues to operate

automatically, from lowering the presser foot to

performing the specified operations at the starting

and end positions in addition to changing the

thread colors. Since the machine can change

threads and finish stitching, sewing time is

reduced.

■ Automatically pulls and holds the thread tails to

the under side of fabric at the beginning and end

of stitching

Since the machine automatically pulls the upper

thread under the fabric at the beginning of a

color, and pulls the upper thread from the fabric

at the time of thread trimming, you don’t need to

deal with the upper thread tail at all.

■ Automatically moves the embroidery frame to

the embroidering position

With single-needle machine, in most cases, the

embroidery pattern is centered in the frame and

the fabric must be correctly positioned within the

embroidery frame with the center of the desired

embroidering position aligned with the center of

the embroidery frame. However, with this

machine, the embroidery frame is moved to

determine the embroidering position, making it

easier to sew the pattern at any place in the frame.

In addition, the embroidering position can be

freely determined after the fabric is hooped and

the embroidery frame is attached to the machine,

regardless of how the fabric is positioned in the

embroidery frame.

So I’m doing key chains and in order to embroider multiples, I insert one design then merge another and so on. It’s only three colors however I don’t know how to set up the machine to run one color first for all as oppose of the machine doing each one and going through all three colors then the next key chain, all three colors and so on. Do I make sense? Submitted on 3-6-2022 at 06:06
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Embroidery Professional - BMP8 in the language / languages: English as an attachment in your email.

The manual is 10,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Embroidery Professional - BMP8

Baby Lock Embroidery Professional - BMP8 Quick start guide - English, French, Spanish - 32 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Baby Lock Embroidery Professional - BMP8 Manual

Product: