661178
9
Zoom out
Zoom in
Previous page
1/16
Next page
4. Start Embellishing cont.
Layer the cloth/fabric/materials that will be felted
together to create the embellishment. Make sure
the smaller piece to be felted is on the correct side
of the project.
NOTE:Depending on the look you want to achieve
this can be either right or wrong side of project.
Place the layers to be felted together under the
cloth presser. Lower the cloth presser lif
ter lever.
If needed, adjust the height of the cloth presser at
this time so the project can move freely under the
cloth presser.
Move the cloth/fabric/materials in any direction so
that the needles can mesh the layers together.
ATTENTION: Always check to make sure the fab-
ric under cloth presser will move freely or does not
flap before embellishing. If necessary
, adjust the
cloth presser height adjusting screw.
When you have finished embellishing, turn the
handwheel toward you making sure the needles
are completely out of the project. Never remove
the embellished project with the needles in the
project, as the needles can bend or break.
NOTE: Always make sure the cloth presser lifter
lever is lowered before starting to embellish. If the
cloth presser lifter lever is not lowered, the
materials can easily be lifted by the needles and
can cause needle breakage.
Remove the sewing table by sliding it to the left
and the machine will convert to a free arm. This
will allow you to embellish sleeves, pant legs, and
small areas.
This will also give you access to the free arm door
to clean out the lint that has accumulated from
embellishing.
6
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Embellisher at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Embellisher in the language / languages: English as an attachment in your email.

The manual is 1,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info